- Outer diameterOD35 mm
- Inner diameterID19 mm
- Length61 mm
- Flange thicknessFLDI6mmDII4mm
- Flange outer diameterFLODEI46mmEII40mm
SuperPro front lower control arm, inner bush kit
Key specs
- PositionFront axle
- Install time3.5 hours
- Supplied as1 kit2b, 2t, 2w, 2s control arm bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF1483K front lower control arm inner bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Stepped shell 39mm to 40mm outside diameter
SuperPro SPF1483K
Specifications
Kit
| Kit type | Front Lower Control Arm - Inner Bush Kit (39/40) |
|---|---|
| Kits required | 1 |
| Includes | 2b, 2t, 2w, 2s Control Arm Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1483K |
|---|---|
| EAN | 9317745014836 |
SuperPro SPF1483K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1483K
Vehicle fitment
12 vehiclesFor most vehicles this part is sold as Control Arm Lower - Inner Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
- 40mm
- 38mm stepped OD
| Vehicle | Years | Position |
|---|---|---|
| Nissan 180SXS13 | 1988–1996 | Front |
| Nissan 200SXS14 | 1993–1999 | Front |
| Nissan 200SXS15 | 2000–2003 | Front |
| Nissan 300ZXZ31 | 1984–1987 | Front |
| Nissan 300ZXZ31 | 1987–1990 | Front |
| Nissan 300ZXZ32 | 1989–1997 | Front |
| Nissan BluebirdU13Sold as: Control Arm Lower - Inner Front Bushing Kit | 1993–1997 | Front |
| Nissan SilviaS13 | 1988–1996 | Front |
| Nissan SilviaS14 | 1993–1999 | Front |
| Nissan SkylineR32 RWD | 1989–1993 | Front |
| Nissan SkylineR33 RWD | 1993–1998 | Front |
| Nissan SkylineR34 RWD | 1998–2000 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.










