Measurements (mm)× 2in kit
- Outer diameterOD35 mm
- Inner diameterID19 mm
- Length61 mm
- Flange thicknessFLDI6mmDII4mm
- Flange outer diameterFLODEI46mmEII40mm
Centre tubeOD × ID × length, mm19 × 14.3 × 63× 2
SuperPro front lower control arm, inner bush kit
Key specs
- PositionFront axle
- Install time3.5 hours
- Supplied as1 kit2b, 2t, 2w, 2s control arm bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF1483K front lower control arm inner bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| NISSAN | 180SX | 1988-1996 S13 |
| NISSAN | 200SX | 1993-1999 S14 |
| NISSAN | 200SX | 2000-2003 S15 |
| NISSAN | 300ZX | 1984-1987 Z31 |
| NISSAN | 300ZX | 1987-1990 Z31 |
| NISSAN | 300ZX | 1989-1997 Z32 |
| NISSAN | BLUEBIRD | 1993-1997 U13 |
| NISSAN | SILVIA | 1988-1996 S13 |
| NISSAN | SILVIA | 1993-1999 S14 |
| NISSAN | SKYLINE | 1989-1993 R32 RWD |
Stepped shell 39mm to 40mm outside diameter
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1483K
Specifications
Kit
| Kit type | Front Lower Control Arm - Inner Bush Kit (39/40) |
|---|---|
| Kits required | 1 |
| Includes | 2b, 2t, 2w, 2s Control Arm Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1483K |
|---|---|
| EAN | 9317745014836 |
SuperPro SPF1483K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1483K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1483K
Vehicle fitment
12 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Inner Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- 40mm
- 38mm stepped OD
| Vehicle | Years | Position |
|---|---|---|
| Nissan 180SXS13 | 1988–1996 | Front |
| Nissan 200SXS14 | 1993–1999 | Front |
| Nissan 200SXS15 | 2000–2003 | Front |
| Nissan 300ZXZ31 | 1984–1987 | Front |
| Nissan 300ZXZ31 | 1987–1990 | Front |
| Nissan 300ZXZ32 | 1989–1997 | Front |
| Nissan BluebirdU13Sold as: Control Arm Lower - Inner Front Bushing Kit | 1993–1997 | Front |
| Nissan SilviaS13 | 1988–1996 | Front |
| Nissan SilviaS14 | 1993–1999 | Front |
| Nissan SkylineR32 RWD | 1989–1993 | Front |
| Nissan SkylineR33 RWD | 1993–1998 | Front |
| Nissan SkylineR34 RWD | 1998–2000 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $48.33
Fitment position: Front
Sale price$65.67
Regular price$114.00
Save $177.23
Fitment position: Rear
Sale price$240.77
Regular price$418.00
Save $111.09
Fitment position: Rear
Sale price$150.91
Regular price$262.00
Save $52.56
Fitment position: Front
Sale price$71.44
Regular price$124.00