Measurements (mm)× 2in kit
- Outer diameterOD27 mm
- Inner diameterID15.8 mm
- Length42.6 mm
- Flange thicknessFL6.8 mm
- Flange outer diameterFLOD30 mm
Centre tubeOD × ID × length, mm16 × 12.5 × 42× 2
SuperPro panhard rod bush kit
Key specs
- PositionVaries by vehicle
- Install time2 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this panhard rod bush kit
The SuperPro SPF1488K panhard rod bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
SuperPro SPF1488K
Specifications
Kit
| Kit type | Panhard Rod Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Varies by vehicle |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1488K |
|---|---|
| EAN | 9317745014881 |
SuperPro SPF1488K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1488K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1488K
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
Position varies by vehicle (Front 1, Rear 3)1 vehicle-specific noteSold as differs on 4 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Panhard Rod Bush Kit. 4 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Holden GeminiTX, TC, TD, TE, TF, TGSold as: Control Arm Upper - Inner Rear Bushing KitInstalls into original shell | 1975–1985 | Front |
| Toyota 4 RunnerVZN180/VZN185/RZN185/RZN185 4x4Sold as: Panhard Rod - Bushing Kit | 1995–2002 | Rear |
| Toyota Hilux Surf_N180-185Sold as: Panhard Rod - Bushing Kit | 1995–2002 | Rear |
| Toyota Land Cruiser Prado90 SeriesSold as: Panhard Rod - Bushing Kit | 1995–2003 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
TOYOTA PRADO 1996-2003 95 SERIES
