Measurements (mm)× 1in kit
- Outer diameterOD62 mm
- Inner diameterID21 mm
- Length52 mm
- Flange thicknessFLDI8mmDII4mm
- Flange outer diameterFLOD70 mm
SuperPro front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF1502XK front lower control arm rear bush kit double offset is engineered with strength and durability in mind, a complete, premium upgrade. It is made with SuperPro's proprietary engineering-grade polyurethane formula. SuperPro says it enhances your vehicle's handling and performance. SuperPro says its polyurethane bushings provide corrected or maintained steering geometry, better handling, increased safety and improved tyre wear.
Application
| MITSUBISHI | FTO | 1994-2001 DE |
| MITSUBISHI | LANCER | 1992-1996 CC GSR |
| MITSUBISHI | LANCER | 1992-1996 CC Sedan and Coupe |
| MITSUBISHI | LANCER | 1992-1996 CC Wagon and Hatch |
| MITSUBISHI | LANCER | 1995-2004 CE Sedan, Coupe and Hatch |
| MITSUBISHI | MIRAGE | 1995-2004 CE - CP |
| PROTON | IMPIAN - WAJA | 2001-2007 Sedan |
| PROTON | JUMBUCK | 2002-2008 Ute |
| PROTON | M21 | 1995-2000 Sedan And Coupe |
| PROTON | PERSONA | 1994-2003 C9_S |
| PROTON | PERSONA | 1996-2005 C9_M |
| PROTON | SATRIA | 1996-2005 C9_M |
| VOLVO | V40 | 1997-2004 VW |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1502XK
Alignment
- Alignment affectedCaster / Anti-Lift
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF1502XK
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit - Double Offset |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1502XK |
|---|---|
| EAN | 9317745707851 |
SuperPro SPF1502XK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1502XK is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1502XK
Vehicle fitment
18 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front3 vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg caster + anti-lift
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Hyundai LantraJ1 GL SedanPerformance Alignment - Suits 1.6L models - 60mm OD - adds +0.5deg caster + anti-lift | 1990–1995 | Front |
| Mitsubishi FTODEPerformance Alignment - Square bushing design - Adds +0.5deg caster + anti-lift | 1994–2001 | Front |
| Mitsubishi LancerCC GSR | 1992–1996 | Front |
| Mitsubishi LancerCC Sedan and Coupe | 1992–1996 | Front |
| Mitsubishi LancerCC Wagon and Hatch | 1992–1996 | Front |
| Mitsubishi LancerCE Sedan, Coupe and Hatch | 1995–2004 | Front |
| Mitsubishi LancerCE Wagon | 1996–2003 | Front |
| Mitsubishi LancerCG, CH, CSPerformance Alignment - Square bushing design - Adds +0.5deg caster + anti-lift | 2002–2008 | Front |
| Mitsubishi MirageCE - CP | 1995–2004 | Front |
| Proton Impian - WajaSedan | 2001–2007 | Front |
| Proton JumbuckUte | 2002–2008 | Front |
| Proton M21Sedan & Coupe | 1995–2000 | Front |
| Proton PersonaC9_M | 1996–2005 | Front |
| Proton PersonaC9_S | 1994–2003 | Front |
| Proton SatriaC9_M | 1996–2005 | Front |
| Proton WiraC9_C, C9_S | 1995–2000 | Front |
| Proton WiraWira | 2000–2002 | Front |
| Volvo V40VW | 1997–2004 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
