Measurements (mm)× 2in kit
- Outer diameterOD16 mm
- Inner diameterID12.5 mm
- Length18 mm
- Flange thicknessFL3 mm
- Flange outer diameterFLOD19 mm
Centre tubeOD × ID × length, mm12.7 × 8.2 × 20× 2
SuperPro rear sway bar end bush kit
Key specs
- PositionRear axle
- Install time2 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this sway bar end bush kit
The SuperPro SPF1531K rear sway bar end bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| HONDA | ACCORD | 1991-1993 CB |
| HONDA | CIVIC | 1987-1993 4th Gen EC, ED, EE |
| HONDA | CIVIC | 1991-1995 5th Gen EG, EH |
| HONDA | CONCERTO | 1989-1995 HW, MA |
| HONDA | INTEGRA | 1993-2001 DC2 And DC4 Vti-R / Type R |
| HONDA | PRELUDE | 1987-1991 BA |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1531K
Specifications
Kit
| Kit type | Rear Sway Bar End Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1531K |
|---|---|
| EAN | 9317745015314 |
SuperPro SPF1531K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1531K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1531K
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear1 vehicle-specific noteSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Sway Bar Link - Upper Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Honda AccordCBSold as: Sway Bar Link - Bushing Kit | 1991–1993 | Rear |
| Honda Civic4th Gen EC, ED, EE | 1987–1993 | Rear |
| Honda Civic5th Gen EG, EH | 1991–1995 | Rear |
| Honda IntegraDC2 & DC4 Vti-R / Type RSuits models to - 1996 | 1993–2001 | Rear |
| Honda PreludeBA | 1987–1991 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
