Measurements (mm)× 4in kit
- Outer diameterOD50 mm
- Inner diameterID18.5 mm
- Length34.5 mm
- Flange thicknessFL4.75 mm
- Flange outer diameterFLOD68 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 63.5× 2
SuperPro front crossmember to chassis mount bush kit
Key specs
- PositionFront axle
- Install time4.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this crossmember to chassis mount bush kit
The SuperPro SPF1547K front crossmember to chassis mount bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD | GRANADA | 1972-1985 Mk1, Mk2 |
| FORD AUSTRALIA | CORTINA | 1970-1983 Mk 3, Mk 4, Mk 5 |
| FORD AUSTRALIA | CORTINA | 1972-1977 TC, TD |
| FORD AUSTRALIA | CORTINA | 1977-1982 TE, TF |
| FORD GERMANY | GRANADA | 1972-1985 Mk 1 And Mk 2 |
| FORD UK | CORTINA | 1970-1983 Mk3, Mk4, Mk5 |
| FORD UK | GRANADA | 1985-1994 Mk3 |
Notes
- smaller size front bush
- drill tube to 14mm for Granada models
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1547K
Specifications
Kit
| Kit type | Front Crossmember To Chassis Mount Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 4.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1547K |
|---|---|
| EAN | 9317745015475 |
SuperPro SPF1547K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1547K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1547K
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notesSold as differs on 2 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Subframe - Front Bushing Kit. 2 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Drill tube to 14mm
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford CortinaMk3, Mk4, Mk5Sold as: Crossmember - To Chassis Bushing Kit63.5mm L tube | 1970–1983 | Front |
| Ford CortinaTC, TDSold as: Crossmember - To Chassis Bushing Kit63.5mm L tube | 1972–1977 | Front |
| Ford GranadaMk 1 & Mk 2 | 1972–1985 | Front |
| Ford GranadaMk1, Mk2 | 1972–1985 | Front |
| Ford GranadaMk3 | 1985–1994 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
