Measurements (mm)× 4in kit
- Outer diameterOD34.3 mm
- Inner diameterID27 mm
- Length48 mm
- Flange thicknessFL20.5 mm
- Flange outer diameterFLOD40 mm
Centre tubeOD × ID × length, mm27 × 22 × 103× 2
SuperPro front upper control arm, outer camber kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF1811K front upper control arm outer camber kit is designed to hold vehicle alignment, boosting performance, a complete, premium upgrade. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. SuperPro says it enhances your vehicle's handling and performance. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
Adjustable Camber Bush Kit
SuperPro SPF1811K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carYes
A wheel alignment is needed after fitting.
SuperPro SPF1811K
Specifications
Kit
| Kit type | Front Upper Control Arm - Outer Camber Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1811K |
|---|---|
| EAN | 9317745018117 |
SuperPro SPF1811K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1811K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1811K
Vehicle fitment
6 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 0.5deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Nissan SkylineR33 AWD | 1993–1998 | Front |
| Nissan SkylineR33 RWD | 1993–1998 | Front |
| Nissan SkylineR34 AWD | 1998–2000 | Front |
| Nissan SkylineR34 RWD | 1998–2000 | Front |
| Nissan StageaWGC34 RWDPerformance Alignment - Adds +0.5deg camber | 1996–2001 | Front |
| Nissan StageaWGNC34 AWDPerformance Alignment - Adds +0.5deg camber | 1996–2001 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
