Measurements (mm)× 8in kit
- Outer diameterOD30 mm
- Inner diameterID22 mm
- Length18 mm
- Flange thicknessFL4 mm
- Flange outer diameterFLOD35 mm
Centre tubeOD × ID × length, mm22.22 × 12 × 40× 4
SuperPro rear upper camber bush kit
Key specs
- PositionRear axle
- Install time4 hours
- Kits required28 bushings, 4 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this upper camber bush kit
The SuperPro SPF1869K rear upper camber bush kit is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. SuperPro says it enhances your vehicle's handling and performance.
Application
| INFINITI | Q45 | 1990-1997 G50 |
| NISSAN | 180SX | 1988-1996 S13 |
| NISSAN | 200SX | 1993-1999 S14 |
| NISSAN | 200SX | 2000-2003 S15 |
| NISSAN | 300ZX | 1989-1997 Z32 |
| NISSAN | INFINITI | 1990-1997 G50 |
| NISSAN | SILVIA | 1988-1996 S13 |
| NISSAN | SILVIA | 1993-1999 S14 |
| NISSAN | SKYLINE | 1989-1993 R32 AWD |
| NISSAN | SKYLINE | 1989-1993 R32 RWD |
| NISSAN | SKYLINE | 1993-1998 R33 AWD |
| NISSAN | SKYLINE | 1993-1998 R33 RWD |
| NISSAN | SKYLINE | 1998-2000 R34 AWD |
| NISSAN | SKYLINE | 1998-2000 R34 RWD |
crush tube length 40mm - Inner And outer camber adjustment
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1869K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF1869K
Specifications
Kit
| Kit type | Rear Upper Camber Bush Kit |
|---|---|
| Kits required | 2 |
| Components per kit | 8 Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1869K |
|---|---|
| EAN | 9317745018698 |
SuperPro SPF1869K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1869K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1869K
Vehicle fitment
15 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear5 vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Upper - Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Infiniti Q45G50Performance Alignment - Adds +/-1.0deg camber | 1990–1997 | Rear |
| Nissan 180SXS13Sold as: Control Arm Upper Rear - Bushing Kit | 1988–1996 | Rear |
| Nissan 200SXS14Performance Alignment - Adds +/- 0.75deg camber | 1993–1999 | Rear |
| Nissan 200SXS15Performance Alignment - Adds +/- 0.75deg camber | 2000–2003 | Rear |
| Nissan 300ZXZ32 | 1989–1997 | Rear |
| Nissan InfinitiG50 | 1990–1997 | Rear |
| Nissan SilviaS13 | 1988–1996 | Rear |
| Nissan SilviaS14Performance Alignment - Adds +/- 0.75deg camber | 1993–1999 | Rear |
| Nissan SkylineR32 AWD | 1989–1993 | Rear |
| Nissan SkylineR32 RWDPerformance Alignment - Suits 2WS - Adds +/- 0.75deg camber | 1989–1993 | Rear |
| Nissan SkylineR33 AWD | 1993–1998 | Rear |
| Nissan SkylineR33 RWD | 1993–1998 | Rear |
| Nissan SkylineR34 AWD | 1998–2000 | Rear |
| Nissan SkylineR34 RWD | 1998–2000 | Rear |
| Nissan StageaWGNC34 AWD | 1996–2001 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $73.69
Fitment position: Front
Sale price$261.31
Regular price$335.00
Save $80.56
Fitment position: Front
Sale price$109.44
Regular price$190.00
Save $148.33
Fitment position: Front
Sale price$808.67
Regular price$957.00
Save $140.57
Fitment position: Rear
Sale price$498.43
Regular price$639.00