Measurements (mm)× 2in kit
- Outer diameterOD30 mm
- Inner diameterID18.8 mm
- Length52 mm
- Flange thicknessFL6.75 mm
- Flange outer diameterFLOD38 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 54× 2
SuperPro front lower control arm, front bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF1915K front lower control arm front bush kit is a polyurethane upgrade or replacement for the front pivot of the front lower control arm, for models with a pressed steel arm. The kit comes with bushings and tubes. It is made from SuperPro's own engineering-grade polyurethane, a quieter and longer lasting alternative to rubber that is unaffected by extreme temperatures, oils, water and coolant.
Note - Bush OD 30mm
SuperPro SPF1915K
Specifications
Kit
| Kit type | Front Lower Control Arm - Front Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1915K |
|---|---|
| EAN | 9317745019152 |
SuperPro SPF1915K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1915K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1915K
Vehicle fitment
43 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front5 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Audi A18X FWD | 2010–2018 | Front |
| Audi A18X Quattro | 2012–2012 | Front |
| Audi A18X S1 Quattro | 2014–2018 | Front |
| Audi A38L FWD30mm OD - Suits models with pressed steel arm | 1996–2003 | Front |
| Audi A38L Quattro30mm OD - Suits models with pressed steel arm | 1996–2003 | Front |
| Audi TT8N FWDSuits models to Chassis No. 8NY060000 | 1998–2006 | Front |
| Hyundai AccentLC | 2000–2005 | Front |
| Hyundai GetzTB | 2002–2010 | Front |
| Seat Cordoba6K | 1993–1999 | Front |
| Seat IbizaMk2 & 3 6K & 6L | 1993–2008 | Front |
| Seat Leon1M 2WD | 1999–2006 | Front |
| Seat Leon1M AWD | 2000–2004 | Front |
| Seat MiiKF | 2011–2019 | Front |
| Seat Toledo1L | 1991–1999 | Front |
| Seat Toledo1M | 1998–2006 | Front |
| Seat Toledo1M2 | 1999–2001 | Front |
| Skoda CitigoNF1 | 2011–2019 | Front |
| Skoda Octavia1U_ AWD | 1996–2010 | Front |
| Skoda Octavia1U_ FWD | 1996–2010 | Front |
| Skoda Roomster5JSuits models 04/2008 - on | 2006–2015 | Front |
| VW Beetle9C1, 1C1 | 1998–2011 | Front |
| VW Bora1J 4motion | 1998–2005 | Front |
| VW Bora1J FWD | 1998–2005 | Front |
| VW CaddyMk2 Typ 9K, 9U | 1996–2004 | Front |
| VW Corrado53i | 1988–1995 | Front |
| VW Corrado53i VR6 | 1988–1995 | Front |
| VW GolfMk2 Typ 19E | 1983–1992 | Front |
| VW GolfMk3, Mk4 Typ 1E7 Convertible | 1993–2002 | Front |
| VW GolfMk3 Typ 1H | 1991–1999 | Front |
| VW GolfMk4 Typ 1J 4motion | 1998–2006 | Front |
| VW GolfMk4 Typ 1J FWD | 1997–2006 | Front |
| VW GolfMk4 Typ 1J GTi | 2001–2005 | Front |
| VW GolfMk4 Typ 1J R32 4motionSuits models with pressed steel arm | 2002–2005 | Front |
| VW JettaMk2 Typ 19E, 1G | 1984–1992 | Front |
| VW NEW Beetle9C, 1C 4motion | 2000–2001 | Front |
| VW NEW Beetle9C, 1C FWD | 1998–2010 | Front |
| VW PassatMk3 Typ 35i | 1988–1997 | Front |
| VW PoloMk3 6N, 6V | 1994–2002 | Front |
| VW PoloMk5 6R, 6C | 2009–2017 | Front |
| VW PoloMK6 AW, BZ | 2017–on | Front |
| VW Polo VanMk3 6N, 6V | 1994–2002 | Front |
| VW T-CrossC1 | 2018–on | Front |
| VW UP121, 122, 123, BL | 2011–on | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
