Measurements (mm)× 2in kit
- Outer diameterODAI30mmAII28mm
- Inner diameterID18.5 mm
- Length27.5 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD36 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 30× 2
SuperPro front sway bar link upper & lower bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit6 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this sway bar link upper & lower bush kit
The SuperPro SPF1923K front sway bar link upper and lower bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| SAAB | 9000 | 1984-1998 Hatch |
| VOLVO | 740 | 1984-1990 744-745 |
| VOLVO | 760 | 1981-1992 704-764 |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1923K
Specifications
Kit
| Kit type | Front Sway Bar Link Upper & Lower Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 6 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1923K |
|---|---|
| EAN | 9317745019237 |
SuperPro SPF1923K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 4in kit
- Outer diameterOD30 mm
- Inner diameterID10 mm
- Length15.5 mm
- Flange thicknessFL2 mm
- Flange outer diameterFLOD14.5 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 30× 2
SuperPro warranty
3 year / 60,000kmSuperPro ball joints, tie rod ends, Duroballs and links are covered by a 3 year / 60,000km warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only.
This product: SPF1923K is protected by a 3 year / 60,000km warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1923K
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| Saab 9000Hatch | 1984–1998 | Front |
| Volvo 740744-745 | 1984–1990 | Front |
| Volvo 760704-764 | 1981–1992 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
