Measurements (mm)× 4in kit
- Outer diameterOD36 mm
- Inner diameterID21.5 mm
- Length26 mm
- Flange thicknessFL6.5 mm
- Flange outer diameterFLOD42 mm
Centre tubeOD × ID × length, mm22.22 × 16.5 × 55× 2
SuperPro front lower control arm, front bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF2029K front lower control arm front bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| HOLDEN | COLORADO | 2008-2012 RC 2WD |
| HOLDEN | COLORADO | 2008-2012 RC 4WD |
| HOLDEN | RODEO | 1988-2003 TFS 4WD |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2029K
Specifications
Kit
| Kit type | Front Lower Control Arm - Front Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2029K |
|---|---|
| EAN | 9317745020295 |
SuperPro SPF2029K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2029K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2029K
Vehicle fitment
14 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front5 vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Inner Front Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Chevrolet ColoradoRC 2WDSuits Hi-Rider models | 2003–2012 | Front |
| Chevrolet ColoradoRC 4WD | 2003–2012 | Front |
| Holden ColoradoRC 2WDSuits Hi-Rider models | 2008–2012 | Front |
| Holden ColoradoRC 4WD | 2008–2012 | Front |
| Holden JackarooUBS I | 1981–1992 | Front |
| Holden RodeoRA 2WDSuits Hi-Rider models | 2003–2008 | Front |
| Holden RodeoRA 4WD & 2WD Hi-Rider | 2003–2008 | Front |
| Holden RodeoTFR 2WDSold as: Control Arm Lower - Inner Bushing Kit56mm L - Suits V6 models | 1988–2003 | Front |
| Holden RodeoTFS 4WD | 1988–2003 | Front |
| Isuzu BighornUBS I | 1984–1991 | Front |
| Isuzu D-MAXTFR I 2WDSuits Hi-Rider models | 2002–2012 | Front |
| Isuzu D-MAXTFS I 4WD | 2002–2012 | Front |
| Isuzu RodeoTFR, TFS | 2007–2012 | Front |
| Isuzu TrooperUBS | 1981–1991 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
