Measurements (mm)× 2in kit
- Outer diameterOD60 mm
- Inner diameterID28 mm
- Length39 mm
- Flange thicknessFL8.5 mm
- Flange outer diameterFLOD66 mm
Centre tubeOD × ID × length, mm30 × 13 × 41× 2
SuperPro front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time3.5 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2082K front lower control arm rear bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| AUDI | A3 | 1996-2003 8L FWD |
| AUDI | A3 | 1996-2003 8L Quattro |
| AUDI | TT | 1998-2006 8N FWD |
| AUDI | TT | 1998-2006 8N Quattro |
| SEAT | LEON | 1999-2006 1M 2WD |
| SEAT | LEON | 2000-2004 1M AWD |
| SEAT | TOLEDO | 1998-2006 1M |
| SEAT | TOLEDO | 1999-2001 1M2 |
| SKODA | OCTAVIA | 1996-2010 1U_ AWD |
| SKODA | OCTAVIA | 1996-2010 1U_ FWD |
| SKODA | ROOMSTER | 2006-2015 5J |
| SKODA | ROOMSTER Praktik | 2006-2015 5J |
| VW | BEETLE | 1998-2011 9C1, 1C1 |
| VW | BORA | 1998-2005 1J 4motion |
| VW | BORA | 1998-2005 1J FWD |
| VW | GOLF | 1997-2006 Mk4 Typ 1J FWD |
| VW | GOLF | 1998-2006 Mk4 Typ 1J 4motion |
| VW | GOLF | 2001-2005 Mk4 Typ 1J GTi |
| VW | GOLF | 2002-2005 Mk4 Typ 1J R32 4motion |
| VW | JETTA | 1998-2005 Mk4 Typ 1J |
| VW | NEW BEETLE | 1998-2010 9C, 1C FWD |
| VW | NEW BEETLE | 2000-2001 9C, 1C 4motion |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2082K
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2082K |
|---|---|
| EAN | 9317745020820 |
SuperPro SPF2082K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2082K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2082K
Vehicle fitment
19 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front8 vehicle-specific notes
Applies to every vehicle unless flagged
- Standard Alignment
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Audi A38L FWDSuits models with pressed steel arm | 1996–2003 | Front |
| Audi A38L QuattroSuits models with pressed steel arm | 1996–2003 | Front |
| Audi TT8N FWDSuits models to Chassis No. 8NY060000 | 1998–2006 | Front |
| Seat Leon1M 2WDSuits models with pressed steel arm | 1999–2006 | Front |
| Seat Leon1M AWD | 2000–2004 | Front |
| Seat Toledo1M | 1998–2006 | Front |
| Seat Toledo1M2 | 1999–2001 | Front |
| Skoda Octavia1U_ AWD | 1996–2010 | Front |
| Skoda Octavia1U_ FWD | 1996–2010 | Front |
| Skoda Roomster5JSuits models 04/2008 - on | 2006–2015 | Front |
| VW Beetle9C1, 1C1Suits models with pressed steel arm | 1998–2011 | Front |
| VW Bora1J 4motion | 1998–2005 | Front |
| VW Bora1J FWD | 1998–2005 | Front |
| VW GolfMk4 Typ 1J 4motion | 1998–2006 | Front |
| VW GolfMk4 Typ 1J FWD | 1997–2006 | Front |
| VW GolfMk4 Typ 1J GTi | 2001–2005 | Front |
| VW GolfMk4 Typ 1J R32 4motionSuits models with pressed steel arm | 2002–2005 | Front |
| VW NEW Beetle9C, 1C 4motionSuits models with pressed steel arm | 2000–2001 | Front |
| VW NEW Beetle9C, 1C FWD | 1998–2010 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
