Measurements (mm)× 2in kit
- Outer diameterOD60 mm
- Inner diameterID28 mm
- Length39 mm
- Flange thicknessFL8.5 mm
- Flange outer diameterFLOD66 mm
Centre tubeOD × ID × length, mm30 × 13 × 4130 × 13 × 41× 1 / 1
SuperPro front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time3.5 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2083K front lower control arm rear bush kit single offset is designed to maintain optimal alignment and make handling consistent, a complete, premium upgrade. Compared with rubber, the polyurethane gives higher quality, quieter and longer lasting bushings. It enhances your vehicle's handling and performance. SuperPro says its polyurethane bushings provide corrected or maintained steering geometry, better handling, increased safety and improved tyre wear.
Application
| AUDI | A3 | 1996-2003 8L FWD |
| AUDI | TT | 1998-2006 8N FWD |
| VW | BEETLE | 1998-2011 9C1, 1C1 |
| VW | BORA | 1998-2005 1J 4motion |
| VW | BORA | 1998-2005 1J FWD |
| VW | GOLF | 1997-2006 Mk4 Typ 1J FWD |
| VW | GOLF | 1998-2006 Mk4 Typ 1J 4motion |
| VW | GOLF | 2001-2005 Mk4 Typ 1J GTi |
| VW | GOLF | 2002-2005 Mk4 Typ 1J R32 4motion |
| VW | JETTA | 1998-2005 Mk4 Typ 1J |
| VW | NEW BEETLE | 1998-2010 9C, 1C FWD |
| VW | NEW BEETLE | 2000-2001 9C, 1C 4motion |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2083K
Alignment
- Alignment affectedCaster
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2083K
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit - Single Offset |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2083K |
|---|---|
| EAN | 9317745020837 |
SuperPro SPF2083K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2083K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2083K
Vehicle fitment
12 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front6 vehicle-specific notes
Applies to every vehicle unless flagged
- Steering-Pull Correction
- Adds +0.75deg caster
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Audi A38L FWDSteering-Pull Correction - Suits models with pressed steel arm - Adds +0.75deg caster | 1996–2003 | Front |
| Audi A38L QuattroSteering-Pull Correction - Suits models with pressed steel arm - Adds +0.75deg caster | 1996–2003 | Front |
| Audi TT8N FWDSteering-Pull Correction - Suits models to Chassis No. 8NY060000 - Adds +0.75deg caster | 1998–2006 | Front |
| VW Beetle9C1, 1C1, Suits models with pressed steel arm - Adds +0.75deg caster | 1998–2011 | Front |
| VW Bora1J 4motion | 1998–2005 | Front |
| VW Bora1J FWD | 1998–2005 | Front |
| VW GolfMk4 Typ 1J 4motion | 1998–2006 | Front |
| VW GolfMk4 Typ 1J FWD | 1997–2006 | Front |
| VW GolfMk4 Typ 1J GTi | 2001–2005 | Front |
| VW GolfMk4 Typ 1J R32 4motionSteering-Pull Correction - Suits models with pressed steel arm - Adds +0.75deg caster | 2002–2005 | Front |
| VW NEW Beetle9C, 1C 4motionSteering-Pull Correction - Suits models with pressed steel arm - Adds +0.75deg caster | 2000–2001 | Front |
| VW NEW Beetle9C, 1C FWD | 1998–2010 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
