- Outer diameterOD51 mm
- Inner diameterID19 mm
- Length37 mm
- Flange thicknessFL7 mm
- Flange outer diameterFLOD63 mm
SuperPro rear leaf spring, front eye bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2229K rear leaf spring front eye bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD AUSTRALIA | FAIRLANE | 1972-1976 ZF, ZG |
| FORD AUSTRALIA | FAIRLANE | 1976-1979 ZH |
| FORD AUSTRALIA | FALCON | 1966-1969 XR-XT |
| FORD AUSTRALIA | FALCON | 1969-1972 XW, XY |
| FORD AUSTRALIA | FALCON | 1972-1976 XA, XB |
| FORD AUSTRALIA | FALCON | 1976-1979 XC |
| FORD AUSTRALIA | FALCON | 1979-1982 XD |
| FORD AUSTRALIA | FALCON | 1982-1993 XE, XF Wagon, Ute and Van |
| FORD AUSTRALIA | FALCON | 1993-1996 XG Ute and Van (Shock Front End) |
| FORD AUSTRALIA | FALCON | 1996-1999 XH Ute and Van (Strut Front End) |
Bush OD 51mm
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2229K
Specifications
Kit
| Kit type | Rear Leaf Spring - Front Eye Bush Kit (51mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2229K |
|---|---|
| EAN | 9317745022299 |
SuperPro SPF2229K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2229K
Vehicle fitment
25 vehicles| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneZA, ZB | 1967–1969 | Rear |
| Ford FairlaneZC, ZD | 1969–1972 | Rear |
| Ford FairlaneZF, ZG | 1972–1976 | Rear |
| Ford FairlaneZH | 1976–1979 | Rear |
| Ford FairmontXA, XB Sedan and Coupe | 1972–1976 | Rear |
| Ford FairmontXA, XB Wagon | 1972–1976 | Rear |
| Ford FairmontXC Sedan and Coupe | 1976–1979 | Rear |
| Ford FairmontXC Wagon | 1976–1979 | Rear |
| Ford FairmontXD Sedan | 1979–1982 | Rear |
| Ford FairmontXD Wagon | 1979–1982 | Rear |
| Ford FairmontXE, XF WagonRound bushing design - Suits models to - 05/1983 | 1982–1988 | Rear |
| Ford FairmontXR, XT Sedan | 1967–1969 | Rear |
| Ford FairmontXR, XT Wagon | 1967–1969 | Rear |
| Ford FairmontXW, XY Sedan51mm OD | 1969–1972 | Rear |
| Ford FairmontXW, XY Wagon51mm OD | 1969–1972 | Rear |
| Ford FalconXA, XB | 1972–1976 | Rear |
| Ford FalconXC | 1976–1979 | Rear |
| Ford FalconXD | 1979–1982 | Rear |
| Ford FalconXE, XF Wagon, Ute and VanRound bushing design - Suits models to - 05/1983 | 1982–1993 | Rear |
| Ford FalconXG Ute and Van (Shock Front End)Round bushing design | 1993–1996 | Rear |
| Ford FalconXH Ute and Van (Strut Front End)51mm OD | 1996–1999 | Rear |
| Ford FalconXR-XT51mm OD - Suits sedan and wagon excludes GT models | 1966–1969 | Rear |
| Ford FalconXW, XY51mm OD - Suits sedan and wagon excludes GT models | 1969–1972 | Rear |
| Ford LandauP5, P6 | 1973–1979 | Rear |
| Ford LTDP5, P6 | 1973–1979 | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.







