Measurements (mm)× 8in kit
- Outer diameterOD35 mm
- Inner diameterID14.3 mm
- Length40 mm
- Flange thicknessFL9 mm
- Flange outer diameterFLOD41 mm
SuperPro rear leaf spring shackle bush kit
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit8 bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this leaf spring shackle bush kit
The SuperPro SPF2233K rear leaf spring shackle bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD AUSTRALIA | FAIRLANE | 1972-1976 ZF, ZG |
| FORD AUSTRALIA | FAIRLANE | 1976-1979 ZH |
| FORD AUSTRALIA | FAIRLANE | 1979-1982 ZJ |
| FORD AUSTRALIA | FALCON | 1966-1969 XR-XT |
| FORD AUSTRALIA | FALCON | 1969-1972 XW, XY |
| FORD AUSTRALIA | FALCON | 1972-1976 XA, XB |
| FORD AUSTRALIA | FALCON | 1976-1979 XC |
| FORD AUSTRALIA | FALCON | 1979-1982 XD |
| FORD AUSTRALIA | FALCON | 1982-1993 XE, XF Wagon, Ute and Van |
| FORD AUSTRALIA | FALCON | 1988-1994 EA, EB, ED Wagon |
| FORD AUSTRALIA | FALCON | 1993-1996 XG Ute and Van (Shock Front End) |
| FORD AUSTRALIA | FALCON | 1994-1996 EF Wagon |
| FORD AUSTRALIA | FALCON | 1996-1998 EL Wagon |
| FORD AUSTRALIA | FALCON | 1996-1999 XH Ute and Van (Strut Front End) |
| FORD AUSTRALIA | FALCON | 1998-2002 AU Wagon, Ute and Cab Chassis |
| FORD AUSTRALIA | FALCON | 2002-2008 BA, BF Wagon, Ute and Cab Chassis |
| FORD AUSTRALIA | FALCON | 2008-2017 FG, FGX Ute and Cab Chassis |
| FORD USA | MUSTANG | 1964-1973 Classic 1st Gen |
35mm OD, 14.3mm ID, 31mm length
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2233K
Specifications
Kit
| Kit type | Rear Leaf Spring Shackle Bush Kit (14.3mm ID) |
|---|---|
| Kits required | 1 |
| Components per kit | 8 Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2233K |
|---|---|
| EAN | 9317745022336 |
SuperPro SPF2233K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2233K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2233K
Vehicle fitment
45 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear4 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneZA, ZB | 1967–1969 | Rear |
| Ford FairlaneZC, ZD | 1969–1972 | Rear |
| Ford FairlaneZF, ZG | 1972–1976 | Rear |
| Ford FairlaneZH | 1976–1979 | Rear |
| Ford FairlaneZJ | 1979–1982 | Rear |
| Ford FairmontAU Wagon | 1998–2002 | Rear |
| Ford FairmontEA, EB, ED Wagon | 1988–1994 | Rear |
| Ford FairmontEF Wagon | 1994–1996 | Rear |
| Ford FairmontEL Wagon | 1996–1998 | Rear |
| Ford FairmontXA, XB Sedan and Coupe | 1972–1976 | Rear |
| Ford FairmontXA, XB Wagon | 1972–1976 | Rear |
| Ford FairmontXC Sedan and Coupe | 1976–1979 | Rear |
| Ford FairmontXC Wagon | 1976–1979 | Rear |
| Ford FairmontXD Sedan | 1979–1982 | Rear |
| Ford FairmontXD Wagon | 1979–1982 | Rear |
| Ford FairmontXE, XF Wagon | 1982–1988 | Rear |
| Ford FairmontXR, XT Sedan14.3mm ID | 1967–1969 | Rear |
| Ford FairmontXR, XT Wagon14.3mm ID | 1967–1969 | Rear |
| Ford FairmontXW, XY Sedan | 1969–1972 | Rear |
| Ford FairmontXW, XY Wagon | 1969–1972 | Rear |
| Ford FalconAU Wagon, Ute and Cab Chassis | 1998–2002 | Rear |
| Ford FalconBA, BF Wagon, Ute and Cab Chassis | 2002–2008 | Rear |
| Ford FalconEA, EB, ED Wagon | 1988–1994 | Rear |
| Ford FalconEF Wagon | 1994–1996 | Rear |
| Ford FalconEL Wagon | 1996–1998 | Rear |
| Ford FalconFG, FGX Ute and Cab Chassis | 2008–2017 | Rear |
| Ford FalconXA, XB | 1972–1976 | Rear |
| Ford FalconXC | 1976–1979 | Rear |
| Ford FalconXD | 1979–1982 | Rear |
| Ford FalconXE, XF Wagon, Ute and Van | 1982–1993 | Rear |
| Ford FalconXG Ute and Van (Shock Front End) | 1993–1996 | Rear |
| Ford FalconXH Ute and Van (Strut Front End) | 1996–1999 | Rear |
| Ford FalconXR-XT14.3mm ID | 1966–1969 | Rear |
| Ford FalconXW, XY | 1969–1972 | Rear |
| Ford LandauP5, P6 | 1973–1979 | Rear |
| Ford LTDFC | 1979–1982 | Rear |
| Ford LTDP5, P6 | 1973–1979 | Rear |
| Ford MustangClassic 1st Gen35mm OD, 14.3mm ID, 31mm length | 1964–1973 | Rear |
| FPV CobraBF UTE | 2005–2007 | Rear |
| FPV F6 SeriesBA, BF Torando | 2004–2008 | Rear |
| FPV F6 SeriesFG Ute | 2008–2014 | Rear |
| FPV GSFG Ute | 2009–2014 | Rear |
| FPV GT SeriesFG Ute | 2008–2014 | Rear |
| FPV Pursuit / Super PursuitBA, BF Ute | 2003–2008 | Rear |
| FPV Pursuit / Super PursuitFG Ute | 2008–2010 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
