Measurements (mm)× 2in kit
- Outer diameterODAI37mmAII36mm
- Inner diameterID22.22 mm
- Length53 mm
- Flange thicknessFL2 mm
- Flange outer diameterFLOD42 mm
Centre tubeOD × ID × length, mm22.22 × 12.7 × 53× 2
SuperPro front control arm, inner bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit2 control arm bushings, tubes & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2268K front control arm inner bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD AUSTRALIA | FAIRLANE | 1972-1976 ZF, ZG |
| FORD AUSTRALIA | FAIRLANE | 1976-1979 ZH |
| FORD AUSTRALIA | FAIRLANE | 1979-1982 ZJ |
| FORD AUSTRALIA | FALCON | 1966-1969 XR-XT |
| FORD AUSTRALIA | FALCON | 1969-1972 XW, XY |
| FORD AUSTRALIA | FALCON | 1972-1976 XA, XB |
| FORD AUSTRALIA | FALCON | 1976-1979 XC |
| FORD AUSTRALIA | FALCON | 1979-1982 XD |
| FORD USA | MUSTANG | 1964-1973 Classic 1st Gen |
step shell 36mm to 37mm OD
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2268K
Specifications
Kit
| Kit type | Front Control Arm - Inner Bush Kit (36/37mm) |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Tubes & Sleeves |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2268K |
|---|---|
| EAN | 9317745022688 |
SuperPro SPF2268K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2268K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2268K
Vehicle fitment
24 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front6 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneZA, ZB | 1967–1969 | Front |
| Ford FairlaneZC, ZD | 1969–1972 | Front |
| Ford FairlaneZF, ZG | 1972–1976 | Front |
| Ford FairlaneZH | 1976–1979 | Front |
| Ford FairlaneZJSuits models to - 05/1980 | 1979–1982 | Front |
| Ford FairmontXA, XB Sedan and Coupe | 1972–1976 | Front |
| Ford FairmontXA, XB Wagon | 1972–1976 | Front |
| Ford FairmontXC Sedan and Coupe | 1976–1979 | Front |
| Ford FairmontXC Wagon | 1976–1979 | Front |
| Ford FairmontXD SedanSuits models to - 05/1981 | 1979–1982 | Front |
| Ford FairmontXD WagonSuits models to - 05/1980 | 1979–1982 | Front |
| Ford FairmontXR, XT Sedan | 1967–1969 | Front |
| Ford FairmontXR, XT Wagon | 1967–1969 | Front |
| Ford FairmontXW, XY Sedan | 1969–1972 | Front |
| Ford FairmontXW, XY Wagon | 1969–1972 | Front |
| Ford FalconXA, XB | 1972–1976 | Front |
| Ford FalconXC | 1976–1979 | Front |
| Ford FalconXDSuits models to - 05/1981 | 1979–1982 | Front |
| Ford FalconXR-XT | 1966–1969 | Front |
| Ford FalconXW, XY | 1969–1972 | Front |
| Ford LandauP5, P6 | 1973–1979 | Front |
| Ford LTDFCSuits models to - 5/1980 | 1979–1982 | Front |
| Ford LTDP5, P6 | 1973–1979 | Front |
| Ford MustangClassic 1st Gen37-36mm OD - Step shell design - Suits models 1967 - on | 1964–1973 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
