Measurements (mm)× 2in kit
- Outer diameterOD36.2 mm
- Inner diameterID21.5 mm
- Length44 mm
- Flange thicknessFL16 mm
- Flange outer diameterFLOD30 mm
Centre tubeOD × ID × length, mm22.22 × 12.3 × 45× 2
SuperPro rear upper control arm, outer bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit2 control arm bushings, tubes & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF2291K rear upper control arm outer bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| MITSUBISHI | LANCER | 1992-1996 EVO 1, 2, 3 |
| MITSUBISHI | LANCER | 1995-2004 CE Sedan, Coupe and Hatch |
| MITSUBISHI | LANCER | 2002-2008 CG, CH, CS |
| MITSUBISHI | LANCER | 2007-2017 CJ, CY AWD |
| MITSUBISHI | LANCER | 2007-2017 CJ, CY FWD |
| MITSUBISHI | MIRAGE | 1995-2004 CE - CP |
| MITSUBISHI | OUTLANDER | 2006-2012 ZG, ZH |
| PROTON | IMPIAN - WAJA | 2001-2007 Sedan |
| PROTON | M21 | 1995-2000 Sedan And Coupe |
| PROTON | PERSONA | 1994-2003 C9_S |
| PROTON | PERSONA | 1996-2005 C9_M |
| PROTON | SATRIA | 1996-2005 C9_M |
36.05mm OD shell
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2291K
Specifications
Kit
| Kit type | Rear Upper Control Arm - Outer Bush Kit |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Tubes & Sleeves |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2291K |
|---|---|
| EAN | 9317745022916 |
SuperPro SPF2291K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2291K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2291K
Vehicle fitment
11 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notesSold as differs on 5 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Upper - Outer Bushing Kit. 5 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Replaces OEM Hyme joint
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Mitsubishi LancerCE Sedan, Coupe and HatchSold as: Control Arm Lower Front - Inner Bushing Kit, Control Arm Upper - Outer Bushing Kit36mm OD, Replaces OEM Hyme joint - Replaces OEM Hyme joint | 1995–2004 | Rear |
| Mitsubishi LancerCJ, CY AWDSold as: Control Arm Lower Front - Inner Bushing Kit, Control Arm Lower Front - Outer Bushing Kit | 2007–2017 | Rear |
| Mitsubishi LancerCJ, CY FWDSold as: Control Arm Lower Front - Inner Bushing Kit, Control Arm Lower Front - Outer Bushing Kit | 2007–2017 | Rear |
| Mitsubishi LancerEVO 1, 2, 3 | 1992–1996 | Rear |
| Mitsubishi MirageCE - CPSold as: Control Arm Lower Front - Inner Bushing Kit, Control Arm Upper - Outer Bushing Kit36mm OD, Replaces OEM Hyme joint - Replaces OEM Hyme joint | 1995–2004 | Rear |
| Mitsubishi OutlanderZG, ZHSold as: Control Arm Lower Front - Inner Bushing Kit, Control Arm Lower Front - Outer Bushing Kit | 2006–2012 | Rear |
| Proton Impian - WajaSedan | 2001–2007 | Rear |
| Proton M21Sedan & Coupe | 1995–2000 | Rear |
| Proton PersonaC9_M | 1996–2005 | Rear |
| Proton PersonaC9_S | 1994–2003 | Rear |
| Proton SatriaC9_M | 1996–2005 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
