Measurements (mm)× 2in kit
- Outer diameterOD65.02 mm
- Inner diameterID21 mm
- Length32 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 63× 4
SuperPro front lower control arm kit
Key specs
- PositionFront axle
- Install time4 hours
- Supplied as1 kit2 shell bushings, 4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this lower control arm kit
The SuperPro SPF2308K front lower offset control arm kit includes six control arm bushings and four tubes for the inner front and rear control arm mounts. Its double offset design corrects caster for a performance alignment.
Double Offset - Caster Correction
SuperPro SPF2308K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2308K
Specifications
Kit
| Kit type | Front Lower Control Arm Kit (Offset) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Shell Bushings, 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2308K |
|---|---|
| EAN | 9317745023081 |
SuperPro SPF2308K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Size 1× 2in kit
- Outer diameterOD42 mm
- Inner diameterID23.8 mm
- Length36 mm
- Flange thicknessFL15 mm
- Flange outer diameterFLOD50 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 63× 4
Size 2× 2in kit
- Outer diameterOD42 mm
- Inner diameterID23.8 mm
- Length25 mm
- Flange thicknessFL4 mm
- Flange outer diameterFLOD50 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 63× 4
Measurements (mm)× 4in kit
- Outer diameterODAI43mmAII31.64mm
- Inner diameterID24 mm
- Length15.5 mm
- Flange thicknessFL1 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 63× 4
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2308K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2308K
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- 65mm OD
- Adds +0.5deg caster
| Vehicle | Years | Position |
|---|---|---|
| Honda Civic7th Gen EP-EV | 2000–2006 | Front |
| Honda Civic8th Gen FD2 Type R | 2007–2010 | Front |
| Honda CR-VRD4-RD7 | 2001–2007 | Front |
| Honda IntegraDC5 Type R / RSX (Includes Type S) | 2001–2007 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
