- Outer diameterOD41.75 mm
- Inner diameterID27 mm
- Length45 mm
- Flange thicknessFL8 mm
- Flange outer diameterFLOD46 mm
SuperPro rear upper control arm, outer bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF2310K rear upper control arm outer bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| HONDA | CIVIC | 2000-2006 7th Gen EP-EV |
| HONDA | CR-V | 2001-2007 RD4-RD7 |
| HONDA | INTEGRA | 2001-2007 DC5 Type R / RSX (Includes Type S) |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2310K
Specifications
Kit
| Kit type | Rear Upper Control Arm - Outer Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2310K |
|---|---|
| EAN | 9317745023104 |
SuperPro SPF2310K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2310K
Vehicle fitment
4 vehiclesFor most vehicles this part is sold as Control Arm Upper - Outer Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
- Standard Alignment
| Vehicle | Years | Position |
|---|---|---|
| Honda Civic7th Gen EP-EV | 2000–2006 | Rear |
| Honda CR-VRD1-RD3 | 1995–2002 | Rear |
| Honda CR-VRD4-RD7Sold as: Control Arm Upper - Inner Bushing Kit, Control Arm Upper - Outer Bushing Kit | 2001–2007 | Rear |
| Honda IntegraDC5 Type R / RSX (Includes Type S) | 2001–2007 | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.







