Measurements (mm)× 2in kit
- Outer diameterOD41.75 mm
- Inner diameterID27 mm
- Length45 mm
- Flange thicknessFL8 mm
- Flange outer diameterFLOD46 mm
Centre tubeOD × ID × length, mm27 × 12.3 × 47× 2
SuperPro rear upper control arm
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this upper control arm
The SuperPro SPF2311K rear upper control arm camber kit is engineered with strength and durability in mind, a complete, premium upgrade. It enhances your vehicle's handling and performance. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
SuperPro SPF2311K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2311K
Specifications
Kit
| Kit type | Rear Upper Control Arm - Camber Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2311K |
|---|---|
| EAN | 9317745023111 |
SuperPro SPF2311K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2311K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2311K
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Upper - Outer Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 1.0deg camber
| Vehicle | Years | Position |
|---|---|---|
| Honda Civic7th Gen EP-EV | 2000–2006 | Rear |
| Honda CR-VRD4-RD7Sold as: Control Arm Upper - Inner Bushing Kit, Control Arm Upper - Outer Bushing Kit | 2001–2007 | Rear |
| Honda IntegraDC5 Type R / RSX (Includes Type S) | 2001–2007 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
