Measurements (mm)× 2in kit
- Outer diameterOD36.3 mm
- Inner diameterID21.95 mm
- Length34 mm
- Flange thicknessFL2.85 mm
- Flange outer diameterFLOD32 mm
Centre tubeOD × ID × length, mm22.22 × 12.3× 2
SuperPro rear upper control arm bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit2 control arm bushings, sleeve & tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this upper control arm bush kit
The SuperPro SPF2326K rear upper control arm bush kit (outer offset) is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro says its polyurethane bushings provide corrected or maintained steering geometry, better handling, increased safety and improved tyre wear.
SuperPro SPF2326K
Alignment
- Alignment affectedCamber
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2326K
Specifications
Kit
| Kit type | Rear Upper Control Arm Bush Kit (Outer - Offset) |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Sleeve & Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2326K |
|---|---|
| EAN | 9317745023265 |
SuperPro SPF2326K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2326K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2326K
Vehicle fitment
23 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear3 vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +1.0deg camber
- Use with SPF2326K for +2.0deg
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford C-MaxMk1Performance Alignment - Adds +/-1.0deg camber, Adds +0.5deg camber - Use with SPF2326K for +/-2.0deg | 2003–2010 | Rear |
| Ford FocusLR | 2002–2005 | Rear |
| Ford FocusLR ST170 | 2003–2005 | Rear |
| Ford FocusLS, LT, LV | 2005–2011 | Rear |
| Ford FocusLS, LT, LV XR5 | 2006–2011 | Rear |
| Ford FocusLV RS | 2010–2010 | Rear |
| Ford FocusLW, LZ | 2011–2018 | Rear |
| Ford FocusLW, LZ ST | 2012–2018 | Rear |
| Ford FocusLZ RS | 2015–2018 | Rear |
| Ford FocusMk1Performance Alignment - Adds +0.5deg camber | 2003–2010 | Rear |
| Ford FocusMK2 STPerformance Alignment - Adds +/-1.0deg camber - Use with SPF2326K for +/-2.0deg | 2005–2012 | Rear |
| Ford MondeoMA-MC | 2007–2015 | Rear |
| Mazda 3BK | 2003–2009 | Rear |
| Mazda 3BK MPS | 2003–2009 | Rear |
| Mazda 3BL | 2009–2013 | Rear |
| Mazda 3BL MPS | 2009–2013 | Rear |
| Mazda 5CR19 | 2005–2010 | Rear |
| Mazda BianteCC | 2008–2018 | Rear |
| Mazda CX-7ER | 2006–2012 | Rear |
| Volvo C30Mk I | 2006–2012 | Rear |
| Volvo C70Mk II | 2006–2013 | Rear |
| Volvo S40MS | 2004–2012 | Rear |
| Volvo V50MW | 2004–2010 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
