Measurements (mm)× 4in kit
- Outer diameterOD37 mm
- Inner diameterID19 mm
- Length29 mm
- Flange thicknessFL8 mm
- Flange outer diameterFLOD45 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 61× 2
SuperPro front lower control arm, front bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2429K front lower control arm front bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Crush Tube length 61mm
SuperPro SPF2429K
Specifications
Kit
| Kit type | Front Lower Control Arm - Front Bush Kit (MY03 On) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2429K |
|---|---|
| EAN | 9317745024293 |
SuperPro SPF2429K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2429K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2429K
Vehicle fitment
11 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front5 vehicle-specific notes
Applies to every vehicle unless flagged
- 61mm L
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Subaru ForesterSG | 2002–2008 | Front |
| Subaru ImprezaGD SedanSuits models MY03 - on | 2000–2007 | Front |
| Subaru ImprezaGG WagonSuits models MY03 - on | 2000–2007 | Front |
| Subaru ImprezaWRX GD SedanSuits models MY03 - on | 2000–2008 | Front |
| Subaru ImprezaWRX GG WagonSuits models MY03 - on | 2000–2008 | Front |
| Subaru ImprezaWRX STi GD SedanSuits models MY03 - on | 2001–2005 | Front |
| Subaru ImprezaWRX STi GD Sedan | 2005–2007 | Front |
| Subaru LegacyBE, BH | 1998–2003 | Front |
| Subaru LibertyBE, BH, BT | 1998–2003 | Front |
| Subaru OutbackBG | 1996–1998 | Front |
| Subaru OutbackBH | 1998–2003 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
