Measurements (mm)× 2in kit
- Outer diameterOD50 mm
- Inner diameterID27.57 mm
- Length58 mm
- Flange thicknessFL7.5 mm
- Flange outer diameterFLOD58 mm
Centre tubeOD × ID × length, mm28.57 × 14.3 × 60× 2
SuperPro rear upper trailing arm bush kit
Key specs
- PositionRear axle
- Install time3.5 hours
- Kits required22 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this upper trailing arm bush kit
The SuperPro SPF2461K rear upper trailing arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| GREAT WALL | TANK 300 | 2022-on 4WD |
| HOLDEN | FRONTERA | 1999-2004 MX |
| ISUZU | MU | 1998-2002 MU7 |
| LEXUS | GX | 2001-2009 GX470 (J120) |
| LEXUS | GX | 2009-on GX460 (J150) |
| LEXUS | LX | 1998-2008 LX470 (J100) |
| TOYOTA | 4 RUNNER | 2002-2009 GRN210/215 4x4 |
| TOYOTA | FJ CRUISER | 2006-2009 GSJ1_ 4WD |
| TOYOTA | FJ CRUISER | 2009-2018 GSJ1_ 4WD |
| TOYOTA | HILUX SURF | 2002-2009 _N210-215 |
| TOYOTA | LAND CRUISER | 1998-2007 100 Series |
| TOYOTA | LAND CRUISER | 2010-on 150 Series |
| TOYOTA | LAND CRUISER PRADO | 2002-2010 120 Series |
| TOYOTA | LAND CRUISER PRADO | 2009-on 150 Series |
Note - 14mm Bolt
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2461K
Specifications
Kit
| Kit type | Rear Upper Trailing Arm Bush Kit |
|---|---|
| Kits required | 2 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2461K |
|---|---|
| EAN | 9317745024613 |
SuperPro SPF2461K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2461K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2461K
Vehicle fitment
14 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notesSold as differs on 4 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Trailing Arm Lower - Bushing Kit. 4 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Great Wall Tank 3004WD | 2022–on | Rear |
| Holden FronteraMXSold as: Trailing Arm Upper - Bushing Kit | 1999–2004 | Rear |
| Isuzu MUMU7Sold as: Trailing Arm Upper - Bushing Kit | 1998–2002 | Rear |
| Lexus GXGX460 (J150)this kit contains bushes to do either one complete arm, or both rear positions or both front positions | 2009–2024 | Rear |
| Lexus GXGX470 (J120) | 2001–2009 | Rear |
| Lexus LXLX470 (J100)Sold as: Trailing Arm Upper - Bushing Kit | 1998–2008 | Rear |
| Toyota 4 RunnerGRN210/215 4x4 | 2002–2009 | Rear |
| Toyota FJ CruiserGSJ15 | 2009–2018 | Rear |
| Toyota FortunerAN50, AN60 | 2005–2015 | Rear |
| Toyota FortunerGUN156 4WD | 2015–on | Rear |
| Toyota Hilux Surf_N210-215 | 2002–2009 | Rear |
| Toyota Land Cruiser100 SeriesSold as: Trailing Arm Upper - Bushing Kit | 1998–2007 | Rear |
| Toyota Land Cruiser Prado120 Series | 2002–2010 | Rear |
| Toyota Land Cruiser Prado150 Seriesthis kit contains bushes to do either one complete arm, or both rear positions or both front positions | 2009–2024 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
