Measurements (mm)× 4in kit
- Outer diameterOD30 mm
- Inner diameterID24 mm
- Length26 mm
- Flange thicknessFL7 mm
- Flange outer diameterFLOD35 mm
Centre tubeOD × ID × length, mm24 × 12.3 × 54× 2
SuperPro rear lateral arm offset bush kit
Key specs
- PositionRear axle
- Install time3.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this lateral arm offset bush kit
The SuperPro SPF2541K rear lateral arm offset bush kit is designed to improve steering feedback and response, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. It is made with SuperPro's proprietary engineering-grade polyurethane formula. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life.
Application
| AUDI | A3 | 1996-2003 8L Quattro |
| AUDI | A3 | 1999-2003 8L S3 Quattro |
| AUDI | TT | 1998-2006 8N Quattro |
| SEAT | LEON | 2000-2004 1M AWD |
| SKODA | OCTAVIA | 1996-2010 1U_ AWD |
| VW | BORA | 1998-2005 1J 4motion |
| VW | GOLF | 1998-2006 Mk4 Typ 1J 4motion |
| VW | GOLF | 2002-2005 Mk4 Typ 1J R32 4motion |
Note - alignment correction - camber adjustment
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2541K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2541K
Specifications
Kit
| Kit type | Rear Lateral Arm Offset Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2541K |
|---|---|
| EAN | 9317745025412 |
SuperPro SPF2541K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2541K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2541K
Vehicle fitment
8 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear3 vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Inner Bushing Kit, Control Arm Upper - Inner Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Audi A38L QuattroPerformance Alignment - Adds +1.0deg camber | 1996–2003 | Rear |
| Audi A38L S3 QuattroPerformance Alignment - Adds +1.0deg camber | 1999–2003 | Rear |
| Audi TT8N Quattro | 1998–2006 | Rear |
| Seat Leon1M AWD | 2000–2004 | Rear |
| Skoda Octavia1U_ AWDSold as: Control Arm Lower - Inner Bushing KitPerformance Alignment - Adds +0.5deg caster | 1996–2010 | Rear |
| VW Bora1J 4motion | 1998–2005 | Rear |
| VW GolfMk4 Typ 1J 4motion | 1998–2006 | Rear |
| VW GolfMk4 Typ 1J R32 4motion | 2002–2005 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
