Measurements (mm)× 4in kit
- Outer diameterOD41 mm
- Inner diameterID30.3 mm
- Length34 mm
- Flange thicknessFL8 mm
- Flange outer diameterFLOD50 mm
Centre tubeOD × ID × length, mm30 × 22 × 70× 2
SuperPro rear control arm, outer camber kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2545K rear control arm outer camber kit is designed to boost precision and control, a complete, premium upgrade. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. SuperPro says it enhances your vehicle's handling and performance. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
Suited to vehicles fitted with Factory Toe Adjusting Arm
SuperPro SPF2545K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carYes
A wheel alignment is needed after fitting.
SuperPro SPF2545K
Specifications
Kit
| Kit type | Rear Control Arm - Outer Camber Kit (IRS) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2545K |
|---|---|
| EAN | 9317745025450 |
SuperPro SPF2545K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2545K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2545K
Vehicle fitment
42 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear8 vehicle-specific notes
Applies to every vehicle unless flagged
- IRS adjusting camber kit
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HDT CommodoreVX Areo SignatureSuits models 08/2001 - on | 2000–2002 | Rear |
| Holden AdventraVY | 2003–2004 | Rear |
| Holden AdventraVZ | 2004–2009 | Rear |
| Holden CalaisVXSuits models 08/2001 - on | 2000–2002 | Rear |
| Holden CalaisVY | 2002–2004 | Rear |
| Holden CalaisVZ | 2004–2006 | Rear |
| Holden CapriceWHSuits models 08/2001 - on | 1999–2003 | Rear |
| Holden CapriceWK | 2003–2004 | Rear |
| Holden CapriceWL | 2004–2006 | Rear |
| Holden CommodoreVU Ute | 2000–2002 | Rear |
| Holden CommodoreVX Sedan and WagonSuits models 08/2001 - on | 2000–2002 | Rear |
| Holden CommodoreVY Sedan and Wagon | 2002–2004 | Rear |
| Holden CommodoreVY Ute | 2002–2004 | Rear |
| Holden CommodoreVZ Sedan and Wagon | 2004–2007 | Rear |
| Holden CommodoreVZ Ute | 2004–2007 | Rear |
| Holden MonaroV2 | 2001–2004 | Rear |
| Holden MonaroVZ | 2004–2006 | Rear |
| Holden StatesmanWHSuits models 08/2001 - on | 1999–2003 | Rear |
| Holden StatesmanWK | 2003–2004 | Rear |
| Holden StatesmanWL | 2004–2006 | Rear |
| HSV AvalancheY SERIES WAGON | 2003–2004 | Rear |
| HSV AvalancheZ SERIES WAGON | 2004–2006 | Rear |
| HSV ClubsportVXSuits models 09/2001 - on | 2000–2002 | Rear |
| HSV ClubsportY SERIES | 2002–2004 | Rear |
| HSV ClubsportZ SERIES | 2004–2006 | Rear |
| HSV Coupe 4V2, Z SERIES | 2004–2006 | Rear |
| HSV GrangeWHSuits models 08/2001 - on | 1999–2003 | Rear |
| HSV GrangeWK | 2003–2004 | Rear |
| HSV GrangeWL | 2004–2006 | Rear |
| HSV GTOV2 COUPE | 2001–2004 | Rear |
| HSV GTOZ SERIES COUPE | 2002–2007 | Rear |
| HSV GTSV2 COUPE | 2001–2004 | Rear |
| HSV GTSVX | 2000–2002 | Rear |
| HSV GTSY SERIES | 2002–2007 | Rear |
| HSV MalooY SERIES | 2002–2004 | Rear |
| HSV MalooZ SERIES | 2004–2007 | Rear |
| HSV SenatorVXSuits models 08/2001 - on | 2000–2002 | Rear |
| HSV SenatorY SERIES | 2002–2004 | Rear |
| HSV SenatorZ SERIES | 2004–2006 | Rear |
| HSV SV300VX | 2001–2001 | Rear |
| HSV SV6000Z SERIES | 2005–2006 | Rear |
| HSV XU6VX | 2000–2002 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
