Measurements (mm)× 4in kit
- Outer diameterOD33 mm
- Inner diameterID20 mm
- Length40 mm
- Flange thicknessFL2.13 mm
- Flange outer diameterFLOD29 mm
Centre tubeOD × ID × length, mm20 × 12.2 × 40× 4
SuperPro rear upper control arm camber kit
Key specs
- PositionRear axle
- Install time4 hours
- Supplied as1 kit4 control arm bushings, sleeves & tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this upper control arm camber kit
The SuperPro SPF2554K rear upper control arm camber kit is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. SuperPro says it enhances your vehicle's handling and performance. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
Application
| MINI | MINI | 2001-2006 R50, R53 |
| MINI | MINI | 2007-2011 R55, R56, R57 |
| MINI | MINI CLUBMAN | 2007-2011 R55, R56, R57 |
| MINI | MINI CLUBVAN | 2007-2011 R55, R56, R57 |
Note - This kit can give up to 1 degree of camber adjustment
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2554K
Alignment
- Alignment affectedCamber
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2554K
Specifications
Kit
| Kit type | Rear Upper Control Arm Camber Kit |
|---|---|
| Kits required | 1 |
| Includes | 4 Control Arm Bushings, Sleeves & Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2554K |
|---|---|
| EAN | 9317745025542 |
SuperPro SPF2554K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2554K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2554K
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear1 vehicle-specific noteSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Bushing Kit, Control Arm Upper - Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +1.0deg camber, Adds +1.0deg toe
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Mini Mini ClubmanR55, R56, R57 | 2007–2011 | Rear |
| Mini Mini ClubvanR55, R56, R57 | 2007–2011 | Rear |
| Mini MiniR50, R53Sold as: Control Arm Upper - Bushing KitPerformance Alignment - Adds +1.0deg camber | 2001–2006 | Rear |
| Mini MiniR55, R56, R57 | 2007–2011 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
