Measurements (mm)× 1in kit
- Outer diameterOD70.1 mm
- Inner diameterID19 mm
- Length80 mm
- Flange thicknessFL10 mm
Centre tubeOD × ID × length, mm20 × 14.5 × 80× 2
SuperPro front strut bar to chassis bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this strut bar to chassis bush kit
The SuperPro SPF2564K front strut bar to chassis bush kit (single offset) is designed to boost precision and control, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. It is made with SuperPro's proprietary engineering-grade polyurethane formula. It enhances your vehicle's handling and performance. SuperPro says its polyurethane bushings provide corrected or maintained steering geometry, better handling, increased safety and improved tyre wear.
SuperPro SPF2564K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2564K
Specifications
Kit
| Kit type | Front Strut Bar To Chassis Bush Kit (Single Offset) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2564K |
|---|---|
| EAN | 9317745025641 |
SuperPro SPF2564K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 1in kit
- Outer diameterOD70.15 mm
- Inner diameterID19 mm
- Length79.98 mm
- Flange thicknessFL20 mm
- Flange outer diameterFLODEI64mmEII38mm
Centre tubeOD × ID × length, mm20 × 14.5 × 80× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2564K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2564K
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Radius Arm Lower - Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Steering-Pull Correction
- Adds +0.5deg caster
| Vehicle | Years | Position |
|---|---|---|
| Mercedes-Benz C-ClassCL203 | 2001–2008 | Front |
| Mercedes-Benz C-ClassW203, S203 | 2001–2007 | Front |
| Mercedes-Benz CLC-ClassCL203 | 2008–2011 | Front |
| Mercedes-Benz CLKA209, C209 | 2003–2010 | Front |
| Mercedes-Benz SLKR171Sold as: Radius Arm Lower - Bushing Kit, Radius Arm Lower - Bushing Kit-Single Offset | 2004–2011 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$635.00
Fitment position: Rear
Sale price$433.00
