Measurements (mm)× 2in kit
- Outer diameterOD41.75 mm
- Inner diameterID23.5 mm
- Length49 mm
- Flange thicknessFL9.5 mm
- Flange outer diameterFLOD36.44 mm
Centre tubeOD × ID × length, mm24 × 12.3 × 50× 2
SuperPro rear control arm Upper-Inner bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit2 control arm bushings, sleeves & tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this control arm Upper-Inner bush kit
The SuperPro SPF2588K rear control arm upper-inner bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
SuperPro SPF2588K
Specifications
Kit
| Kit type | Rear Control Arm Upper-Inner Bush Kit |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Sleeves & Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2588K |
|---|---|
| EAN | 9317745025887 |
SuperPro SPF2588K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2588K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2588K
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Standard Alignment
| Vehicle | Years | Position |
|---|---|---|
| Honda AccordCL, CM | 2003–2008 | Rear |
| Honda AccordEuro CL-CM | 2003–2008 | Rear |
| Honda Accord EuroCL-CM 7th Generation | 2003–2008 | Rear |
| Honda Accord EuroEuro CL-CM | 2003–2008 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
