Measurements (mm)× 4in kit
- Outer diameterOD40 mm
- Inner diameterID22 mm
- Length34.5 mm
- Flange thicknessFL6.5 mm
- Flange outer diameterFLOD50 mm
Centre tubeOD × ID × length, mm22.22 × 14.3 × 73× 2
SuperPro rear leaf spring, front eye bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2670K rear leaf spring front eye bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD | RANGER | 2006-2011 PJ, PK 2WD |
| FORD | RANGER | 2006-2011 PJ, PK 4WD |
| FOTON | TUNLAND | 2012-on P201 4WD |
| HOLDEN | COLORADO | 2012-2020 RG 2WD |
| HOLDEN | COLORADO | 2012-2020 RG 4WD And 2WD Hi-Rider |
| ISUZU | D-MAX | 2012-2020 TFR 2WD |
| ISUZU | D-MAX | 2012-2020 TFS 4WD |
| ISUZU | D-MAX | 2019-on TFR, RG01 2WD |
| ISUZU | D-MAX | 2019-on TFS, RG01 4WD |
| LDV | T60 | 2017-on TK 4WD |
| MAZDA | BT-50 | 2006-2011 UN |
| MAZDA | BT-50 | 2020-on TFS / RG04 |
| TOYOTA | HILUX | 2005-2015 KUN16, GGN15 2WD |
| TOYOTA | HILUX | 2005-2015 KUN26, GGN25 4WD |
| TOYOTA | HILUX | 2015-on GGN, GUN 2WD |
| TOYOTA | HILUX | 2015-on GGN, GUN 4WD |
| TOYOTA | HILUX | 2023-on GUN GR Sport 4WD |
| TOYOTA | TUNDRA | 2006-2021 K50 |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2670K
Specifications
Kit
| Kit type | Rear Leaf Spring - Front Eye Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2670K |
|---|---|
| EAN | 9317745026709 |
SuperPro SPF2670K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2670K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2670K
Vehicle fitment
24 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear3 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford RangerPJ, PK 2WD | 2006–2011 | Rear |
| Ford RangerPJ, PK 4WD | 2006–2011 | Rear |
| Foton TunlandP201 4WD | 2012–2024 | Rear |
| Holden ColoradoRG 2WD | 2012–2020 | Rear |
| Holden ColoradoRG 4WD & 2WD Hi-Rider | 2012–2020 | Rear |
| HSV SportscatRG | 2018–2020 | Rear |
| Isuzu D-MAXTFR II 2WDSuits Hi-Rider models | 2012–2020 | Rear |
| Isuzu D-MAXTFR III, RG01 2WD | 2019–on | Rear |
| Isuzu D-MAXTFS II 4WD | 2012–2020 | Rear |
| Isuzu D-MAXTFS III, RG01 4WD | 2019–on | Rear |
| LDV T60TK 4WD | 2017–on | Rear |
| Mazda BT-50TF, RG04 2WD | 2020–on | Rear |
| Mazda BT-50TF, RG04 4WD | 2020–on | Rear |
| Mazda BT-50UN 2WD | 2006–2011 | Rear |
| Mazda BT-50UN 4WD | 2006–2011 | Rear |
| Toyota HiluxGGN120R, GUN122R, 123R, 136R, TGN121R (N80) 2WD40mm OD - Suits dual cab models | 2015–2025 | Rear |
| Toyota HiluxGGN125R, GUN126R, 136R (N80) 4WD | 2015–2025 | Rear |
| Toyota HiluxGGN25R, KUN26R (N70) 4WD | 2005–2015 | Rear |
| Toyota HiluxGUN126R GR SPORT (N80) 4WD | 2023–2025 | Rear |
| Toyota HiluxGUN126R ROGUE WIDE-BODY (N80) 4WD | 2022–2025 | Rear |
| Toyota HiluxGUN226R, 227R (N90) 4WD | 2025–on | Rear |
| Toyota HiluxKUN16, GGN15 2WD40mm OD - Suits dual cab models | 2005–2015 | Rear |
| Toyota TacomaN245, 250, 270 4WD | 2004–2015 | Rear |
| Toyota TundraXK50 | 2006–2021 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
