Measurements (mm)× 4in kit
- Outer diameterOD44 mm
- Inner diameterID25 mm
- Length49 mm
- Flange thicknessFL8 mm
- Flange outer diameterFLOD51.5 mm
Centre tubeOD × ID × length, mm25 × 10 × 50× 4
SuperPro rear control arm upper camber bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 4 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this control arm upper camber bush kit
The SuperPro SPF2679K rear control arm upper camber bush kit is designed to improve steering feedback and response, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro says it enhances your vehicle's handling and performance. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life.
SuperPro SPF2679K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2679K
Specifications
Kit
| Kit type | Rear Control Arm Upper Camber Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2679K |
|---|---|
| EAN | 9317745714750 |
SuperPro SPF2679K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2679K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2679K
Vehicle fitment
1 vehicle
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +1.0deg camber
| Vehicle | Years | Position |
|---|---|---|
| Mazda RX-7Series 6, 7, 8 FD | 1992–2002 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
