Measurements (mm)× 2in kit
- Outer diameterOD43 mm
- Inner diameterID28 mm
- Length41 mm
- Flange thicknessFL5.5 mm
- Flange outer diameterFLOD48 mm
Centre tubeOD × ID × length, mm28.57 × 21.5 × 44× 2
SuperPro front panhard rod bushing
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this panhard rod bushing
The SuperPro SPF2705K front panhard rod bushing replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
21.5mm ID tube
SuperPro SPF2705K
Specifications
Kit
| Kit type | Front Panhard Rod Bushing |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2705K |
|---|---|
| EAN | 9317745027058 |
SuperPro SPF2705K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2705K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2705K
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford Excursion1st Gen 2WD | 2000–2005 | Front |
| Ford Excursion1st Gen 4WD | 2000–2005 | Front |
| Ford F-35010th-11th Gen 2WD21.5mm ID - Suits models 1999 - 2004 with monobeam axle | 1996–2007 | Front |
| Ford F-35010th-11th Gen 4WD21.5mm ID - Suits models 1999 - 2004 | 1996–2007 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
