- Outer diameterOD45.8 mm
- Inner diameterID27 mm
- Length58.8 mm
- Flange thicknessFL8.5 mm
- Flange outer diameterFLODEI55mmEII53mm
SuperPro front upper control arm, inner bush kit
Key specs
- PositionFront axle
- Install time4 hours
- Supplied as1 kit4 upper control arm bushings, tubes & washers
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF2845K front upper control arm inner bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
SuperPro SPF2845K
Specifications
Kit
| Kit type | Front Upper Control Arm - Inner Bush Kit |
|---|---|
| Kits required | 1 |
| Includes | 4 Upper Control Arm Bushings, Tubes & Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2845K |
|---|---|
| EAN | 9317745028451 |
SuperPro SPF2845K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2845K
Vehicle fitment
16 vehicles- Standard Alignment
| Vehicle | Years | Position |
|---|---|---|
| Foton TunlandP201 4WD | 2012–2024 | Front |
| Lexus GXGX460 (J150) | 2009–2024 | Front |
| Lexus GXGX470 (J120) | 2001–2009 | Front |
| Toyota 4 RunnerGRN210/215 4x4 | 2002–2009 | Front |
| Toyota FJ CruiserGSJ15 | 2009–2018 | Front |
| Toyota FortunerAN50, AN60 | 2005–2015 | Front |
| Toyota FortunerGUN156 4WD | 2015–on | Front |
| Toyota HiluxGGN125R, GUN126R, 136R (N80) 4WD | 2015–2025 | Front |
| Toyota HiluxGGN25R, KUN26R (N70) 4WD | 2005–2015 | Front |
| Toyota HiluxGUN126R GR SPORT (N80) 4WD | 2023–2025 | Front |
| Toyota HiluxGUN126R ROGUE WIDE-BODY (N80) 4WD | 2022–2025 | Front |
| Toyota HiluxGUN226R, 227R (N90) 4WD | 2025–on | Front |
| Toyota Hilux Surf_N210-215 | 2002–2009 | Front |
| Toyota Land Cruiser Prado120 Series | 2002–2010 | Front |
| Toyota Land Cruiser Prado150 Series | 2009–2024 | Front |
| Toyota TacomaN245, 250, 270 4WD | 2004–2015 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.























































