Measurements (mm)× 2in kit
- Outer diameterOD37 mm
- Inner diameterID24 mm
- Length48 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD43 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 50× 2
SuperPro rear toe arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this toe arm bush kit
The SuperPro SPF2868K rear toe arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Suits Arm with Hyme Joint in outer position
SuperPro SPF2868K
Specifications
Kit
| Kit type | Rear Toe Arm Bush Kit (Inner) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2868K |
|---|---|
| EAN | 9317745028680 |
SuperPro SPF2868K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2868K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2868K
Vehicle fitment
18 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Suits arm with Hyme Joint outer
| Vehicle | Years | Position |
|---|---|---|
| Chevrolet Camaro5th Gen | 2009–2015 | Rear |
| HDT CommodoreInterceptor Retro | 2006–2013 | Rear |
| HDT CommodoreVC Retro | 2006–2013 | Rear |
| HDT CommodoreVH Retro | 2006–2013 | Rear |
| HDT CommodoreVK Retro | 2006–2013 | Rear |
| HDT CommodoreVL Retro | 2006–2013 | Rear |
| Holden CalaisVE | 2006–2013 | Rear |
| Holden CapriceWM | 2006–2013 | Rear |
| Holden CommodoreVE Sedan, Wagon and Ute | 2006–2013 | Rear |
| Holden StatesmanWM | 2006–2010 | Rear |
| HSV ClubsportE SERIES | 2006–2013 | Rear |
| HSV GrangeWM | 2007–2013 | Rear |
| HSV GTSE SERIES | 2006–2013 | Rear |
| HSV MalooE SERIES | 2007–2013 | Rear |
| HSV SenatorE SERIES | 2006–2013 | Rear |
| HSV W427E SERIES | 2008–2013 | Rear |
| Vauxhall VXR8E SERIES | 2007–2013 | Rear |
| Vauxhall VXR8 MalooE SERIES | 2008–2013 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
