Measurements (mm)× 4in kit
- Outer diameterODAI43mmAII31mm
- Inner diameterID23.3 mm
- Length14.5 mm
- Flange thicknessFL43 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 62× 2
SuperPro front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit6 control arm bushings, 2 sleeves & tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF2904K front lower control arm rear bush kit double offset is designed to hold vehicle alignment, boosting performance, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. SuperPro bushings offer greater quality and reliability through their unique materials.
Application
| LEXUS | ES | 2001-2008 V30 |
| LEXUS | RX | 2003-2008 XU30 |
| LEXUS | RX | 2008-2015 AL10 |
| TOYOTA | AURION | 2006-2011 ACV4_, GSV4_ |
| TOYOTA | CAMRY | 2006-2011 XV40 |
| TOYOTA | HIGHLANDER | 2007-2013 _U4_ |
| TOYOTA | KLUGER | 2000-2007 _U2_ |
| TOYOTA | KLUGER | 2007-2013 _U4_ |
| TOYOTA | TARAGO | 2000-2006 R30 |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF2904K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2904K
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit - Double Offset |
|---|---|
| Kits required | 1 |
| Includes | 6 Control Arm Bushings, 2 Sleeves & Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2904K |
|---|---|
| EAN | 9317745029045 |
SuperPro SPF2904K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 2in kit
- Outer diameterOD60.15 mm
- Inner diameterID22 mm
- Length33 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 62× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2904K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2904K
Vehicle fitment
9 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front1 vehicle-specific note
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg caster
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Lexus ESV30Performance Alignment - Adds +/- 0.5deg caster | 2001–2008 | Front |
| Lexus RXAL10 | 2008–2015 | Front |
| Lexus RXXU30 | 2003–2008 | Front |
| Toyota AurionACV4_, GSV4_ | 2006–2011 | Front |
| Toyota CamryXV40 | 2006–2011 | Front |
| Toyota Highlander_U4_ | 2007–2013 | Front |
| Toyota Kluger_U2_ | 2000–2007 | Front |
| Toyota Kluger_U4_ | 2007–2013 | Front |
| Toyota TaragoR30 | 2000–2006 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
