Measurements (mm)× 2in kit
- Outer diameterOD74.15 mm
- Inner diameterID24 mm
- Length30 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 60× 2
SuperPro front lower control arm, front bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit6 control arm bushings, 2 tubes & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF2947K front lower control arm front bush kit (offset) is engineered with strength and durability in mind, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro bushings offer greater quality and reliability through their unique materials. SuperPro says it enhances your vehicle's handling and performance.
Double Offset For Caster Increase
SuperPro SPF2947K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF2947K
Specifications
Kit
| Kit type | Front Lower Control Arm - Front Bush Kit (Offset) |
|---|---|
| Kits required | 1 |
| Includes | 6 Control Arm Bushings, 2 Tubes & Sleeves |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF2947K |
|---|---|
| EAN | 9317745029472 |
SuperPro SPF2947K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 4in kit
- Outer diameterODAI60mmAII36mm
- Inner diameterID26 mm
- Length15.25 mm
- Flange thicknessFL2 mm
- Flange outer diameterFLOD60 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 60× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF2947K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF2947K
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 0.5deg caster
| Vehicle | Years | Position |
|---|---|---|
| Honda AccordCL, CM | 2003–2008 | Front |
| Honda AccordEuro CL-CM | 2003–2008 | Front |
| Honda Accord EuroCL-CM 7th Generation | 2003–2008 | Front |
| Honda Accord EuroEuro CL-CM | 2003–2008 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
