Measurements (mm)× 2in kit
- Outer diameterOD59.9 mm
- Inner diameterID285 mm
- Length30 mm
Centre tubeOD × ID × length, mm30 × 22.22 × 64.6× 2
SuperPro front strut bar to chassis bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit6 control arm bushings, 2 tubes & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this strut bar to chassis bush kit
The SuperPro SPF3042K front strut bar to chassis bush kit double offset is designed to hold vehicle alignment, boosting performance, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. It is a superior alternative to rubber, providing higher quality, quieter, longer lasting bushings. SuperPro bushings offer greater quality and reliability through their unique materials.
SuperPro SPF3042K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3042K
Specifications
Kit
| Kit type | Front Strut Bar To Chassis Bush Kit - Double Offset |
|---|---|
| Kits required | 1 |
| Includes | 6 Control Arm Bushings, 2 Tubes & Sleeves |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3042K |
|---|---|
| EAN | 9317745030423 |
SuperPro SPF3042K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 4in kit
- Outer diameterODAI50mmAII41.16mm
- Inner diameterID29 mm
- Length18.5 mm
Centre tubeOD × ID × length, mm30 × 22.22 × 64.6× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3042K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3042K
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg caster
| Vehicle | Years | Position |
|---|---|---|
| Lexus ISXE10 | 1999–2005 | Front |
| Toyota ChaserX100 | 1996–2002 | Front |
| Toyota CrestaX100 | 1996–2002 | Front |
| Toyota Mark IIX100 | 1996–2001 | Front |
| Toyota Mark IIX90 | 1992–1996 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
