Measurements (mm)× 4in kit
- Outer diameterODAI50mmAII42mm
- Inner diameterID28 mm
- Length15.2 mm
Centre tubeOD × ID × length, mm28.57 × 16.3 × 60× 2
SuperPro front strut bar to chassis mount bush kit
Key specs
- PositionFront axle
- Install time3.5 hours
- Supplied as1 kit6 control arm bushings, 2 tubes & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this strut bar to chassis mount bush kit
The SuperPro SPF3088K front strut bar to chassis mount bush kit single offset is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. Compared with rubber, the polyurethane gives higher quality, quieter and longer lasting bushings. SuperPro bushings offer greater quality and reliability through their unique materials. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life.
Note - 60mm OD
SuperPro SPF3088K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3088K
Specifications
Kit
| Kit type | Front Strut Bar To Chassis Mount Bush Kit - Single Offset |
|---|---|
| Kits required | 1 |
| Includes | 6 Control Arm Bushings, 2 Tubes & Sleeves |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3088K |
|---|---|
| EAN | 9317745030881 |
SuperPro SPF3088K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 1in kit
- Outer diameterOD60.1 mm
- Inner diameterID27 mm
- Length30 mm
Centre tubeOD × ID × length, mm28.57 × 16.3 × 60× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3088K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3088K
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Steering-Pull Correction
- Adds +0.5deg caster
| Vehicle | Years | Position |
|---|---|---|
| Lexus GSS140 | 1993–1997 | Front |
| Lexus GSS160 | 1997–2000 | Front |
| Toyota AristoJZS147 | 1993–1996 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$248.00
