Measurements (mm)× 1in kit
- Outer diameterOD60.15 mm
- Inner diameterID25 mm
- Length27 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 54× 2
SuperPro front control arm lower inner rear single offset bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2 shell bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF3112K front control arm lower inner rear single offset bush kit is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. SuperPro says its polyurethane bushings provide corrected or maintained steering geometry, better handling, increased safety and improved tyre wear.
Application
| CHRYSLER | SEBRING | 2007-2010 JS |
| CITROEN | C-CROSSER | 2007-2012 EP |
| CITROEN | C-CROSSER ENTERPRISE | 2009-2012 EP |
| DODGE | CALIBER | 2006-2012 PM |
| HYUNDAI | ELANTRA | 2000-2006 XD |
| HYUNDAI | TIBURON | 2002-2009 GK |
| JEEP | COMPASS | 2006-2016 MK49 |
| JEEP | PATRIOT | 2007-2017 Mk74 |
| MITSUBISHI | AIRTREK | 2003-2006 ZE, ZF |
| MITSUBISHI | ASX | 2010-2023 XA - XD |
| MITSUBISHI | COLT | 2004-2012 RG |
| MITSUBISHI | COLT CZC | 2004-2012 RG |
| MITSUBISHI | L400 | 2007-on Gen V, D5 |
| MITSUBISHI | LANCER | 2002-2008 CG, CH, CS |
| MITSUBISHI | LANCER | 2007-2017 CJ, CY AWD |
| MITSUBISHI | LANCER | 2007-2017 CJ, CY FWD |
| MITSUBISHI | OUTLANDER | 2003-2006 ZE, ZF |
| MITSUBISHI | OUTLANDER | 2006-2012 ZG, ZH |
| MITSUBISHI | OUTLANDER | 2012-2021 ZJ, ZK, ZL |
| PEUGEOT | 4007 | 2007-2013 GP |
| PEUGEOT | 4008 | 2012-2017 All |
Steering Pull Correction Kit Bush OD 60mm
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF3112K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3112K
Specifications
Kit
| Kit type | Front Control Arm Lower Inner Rear Single Offset Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Shell Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3112K |
|---|---|
| EAN | 9317745031123 |
SuperPro SPF3112K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 4in kit
- Outer diameterODAI49mmAII42.17mm
- Inner diameterID26.7 mm
- Length13.75 mm
- Flange thicknessFL1 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 54× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3112K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3112K
Vehicle fitment
25 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front4 vehicle-specific notes
Applies to every vehicle unless flagged
- Steering-Pull Correction
- Adds +0.5deg caster
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Chrysler SebringJS | 2007–2010 | Front |
| Citroen C-Crosser EnterpriseEP | 2009–2012 | Front |
| Citroen C-CrosserEP | 2007–2012 | Front |
| Citroen C4 AircrossSeries 1 | 2010–2017 | Front |
| Dodge AvengerJS | 2007–2014 | Front |
| Dodge CaliberPM | 2006–2012 | Front |
| Hyundai Elantra LavitaFCSteering-Pull Correction - 60mm OD - suits models 08/2002 - on - Adds +0.5deg caster | 2001–2010 | Front |
| Hyundai ElantraXDSteering-Pull Correction - 60mm OD - suits models 08/2002 - on - Adds +0.5deg caster | 2000–2006 | Front |
| Hyundai TiburonGKSteering-Pull Correction - 60mm OD - suits models 08/2002 - on - Adds +0.5deg caster | 2002–2009 | Front |
| Jeep CompassMK49 | 2006–2016 | Front |
| Jeep PatriotMk74 | 2007–2017 | Front |
| Mitsubishi AirtrekZE, ZF | 2003–2006 | Front |
| Mitsubishi ASXXA - XD | 2010–2023 | Front |
| Mitsubishi Colt CZCRG | 2004–2012 | Front |
| Mitsubishi ColtRG | 2004–2012 | Front |
| Mitsubishi L400Gen V, D5 | 2007–on | Front |
| Mitsubishi LancerCG, CH, CSSteering-Pull Correction - Round bushing design - Adds +0.5deg caster | 2002–2008 | Front |
| Mitsubishi LancerCJ, CY AWD | 2007–2017 | Front |
| Mitsubishi LancerCJ, CY FWD | 2007–2017 | Front |
| Mitsubishi OutlanderZE, ZF | 2003–2006 | Front |
| Mitsubishi OutlanderZG, ZH | 2006–2012 | Front |
| Mitsubishi OutlanderZJ, ZK, ZL | 2012–2021 | Front |
| Peugeot 4007GP | 2007–2013 | Front |
| Peugeot 4008All | 2012–2017 | Front |
| Smart Forfour454 | 2004–2006 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $73.69
Fitment position: Front
Sale price$261.31
Regular price$335.00
Save $80.56
Fitment position: Front
Sale price$109.44
Regular price$190.00
Save $148.33
Fitment position: Front
Sale price$808.67
Regular price$957.00
Save $140.57
Fitment position: Rear
Sale price$498.43
Regular price$639.00