Measurements (mm)× 2in kit
- Outer diameterOD62.95 mm
- Inner diameterID22 mm
- Length30 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 54.5× 2
SuperPro control arm Lower-Inner rear bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit6 control arm bushings, 2 tubes & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this control arm Lower-Inner rear bush kit
The SuperPro SPF3135K control arm lower-inner rear bush kit double offset is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. It is a superior alternative to rubber, providing higher quality, quieter, longer lasting bushings. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. SuperPro says it enhances your vehicle's handling and performance.
Application
2 x offset bushings for caster adjustment
To suit 63mm ID arm
| HYUNDAI | ELANTRA | 2000-2006 XD |
| HYUNDAI | GETZ | 2002-2010 TB |
| HYUNDAI | TIBURON | 2002-2009 GK |
| KIA | CERATO | 2004-2008 LD |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF3135K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3135K
Specifications
Kit
| Kit type | Control Arm Lower-Inner Rear Bush Kit - Double Offset |
|---|---|
| Kits required | 1 |
| Includes | 6 Control Arm Bushings, 2 Tubes & Sleeves |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3135K |
|---|---|
| EAN | 9317745031352 |
SuperPro SPF3135K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 4in kit
- Outer diameterODAI48mmAII34mm
- Inner diameterID24 mm
- Length12.5 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 54.5× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3135K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3135K
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- 63mm OD
- Adds +0.5deg caster
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Hyundai ElantraXDPerformance Alignment - 60mm OD - suits models 08/2002 - on - Adds +0.5deg caster | 2000–2006 | Front |
| Hyundai GetzTB | 2002–2010 | Front |
| Hyundai TiburonGK | 2002–2009 | Front |
| KIA CeratoLDPerformance Alignment - Adds +0.5deg caster | 2004–2008 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
