Name: SPF3180K - Rear Lower Arm Bush Kit for TOYOTA CELICA 1981-1985 RA60-65
Brand: SuperPro
SKU: SPF3180K
Price: 194.00 AUD
Availability: InStock

SPF3180K - Rear Lower Arm Bush Kit for TOYOTA CELICA 1981-1985 RA60-65

Roll over image to zoom in Click on image to zoom

SuperPro rear lower control arm bush kit

Key specs

PositionRear axle
Install time4 hours
Supplied as1 kit8 bushings, 4 tubes
AlignmentNeeded after fitting

Engineering-grade polyurethane
Unaffected by heat, oils, water and coolant
Designed in Australia

Before you fit

A wheel alignment is needed after fitting.

About this lower control arm bush kit

The SuperPro SPF3180K rear lower control arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.

Application

70mm long inner tubes, 65mm long outer tubes

SuperPro Bushings are the perfect suspension upgrade or replacement solution!

Lifetime Warranty
Enhances vehicle handling and performance
Unaffected by extreme temperatures, oils, water or coolant
A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
Made with SuperPro's proprietary engineering-grade polyurethane formula
Designed in Australia

SuperPro SPF3180K

Specifications

Kit

Kit type	Rear Lower Control Arm Bush Kit
Kits required	1
Components per kit	8 Bushings, 4 Tubes

Fitting

Fitting position	Rear
Install time	4 hours
Wheel alignment required	Yes

Identifiers

SKU	SPF3180K
EAN	9317745031802

SuperPro SPF3180K

Bush dimensions

All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.

Type 18 in kit

Size 1× 2in kit

Outer diameterOD36 mm
Inner diameterID22 mm
Length31 mm
Flange thicknessFL6.5 mm
Flange outer diameterFLOD42 mm

Centre tubeOD × ID × length, mm22.22 × 12.3 × 6522.2 × 14.3 × 70× 2 / 2

Size 2× 2in kit

Outer diameterOD36 mm
Inner diameterID22 mm
Length34.5 mm
Flange thicknessFL10 mm
Flange outer diameterFLOD42 mm

Centre tubeOD × ID × length, mm22.22 × 12.3 × 6522.2 × 14.3 × 70× 2 / 2

Size 3× 2in kit

Outer diameterOD36 mm
Inner diameterID22 mm
Length36 mm
Flange thicknessFL11.5 mm
Flange outer diameterFLOD42 mm

Centre tubeOD × ID × length, mm22.22 × 12.3 × 6522.2 × 14.3 × 70× 2 / 2

Size 4× 2in kit

Outer diameterOD36 mm
Inner diameterID22 mm
Length27.5 mm
Flange thicknessFL3 mm
Flange outer diameterFLOD42 mm

Centre tubeOD × ID × length, mm22.22 × 12.3 × 6522.2 × 14.3 × 70× 2 / 2

SPF3180K

Vehicle fitment

5 vehicles

Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.

One position: RearNo vehicle-specific notes

Vehicle	Years	Position
Toyota CarinaA60	1981–1988	Rear
Toyota CelicaMA61, _A6_	1981–1986	Rear
Toyota CelicaRA60-65	1981–1985	Rear
Toyota CoronaST141, RT142	1983–1987	Rear
Toyota Mark IIX63	1980–1983	Rear