Measurements (mm)× 4in kit
- Outer diameterOD45.8 mm
- Inner diameterID27 mm
- Length58.8 mm
- Flange thicknessFL8.5 mm
- Flange outer diameterFLOD55 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 59.25× 4
SuperPro front upper control arm, inner bush kit
Key specs
- PositionFront axle
- Install time4 hours
- Supplied as1 kit4 bushings, 4 tubes, 4 washers
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF3230K front upper control arm inner bush kit (offset) is designed to hold vehicle alignment, boosting performance, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life.
Application
| FOTON | TUNLAND | 2012-on P201 4WD |
| LEXUS | GX | 2001-2009 GX470 (J120) |
| LEXUS | GX | 2009-on GX460 (J150) |
| TOYOTA | 4 RUNNER | 2002-2009 GRN210/215 4x4 |
| TOYOTA | FJ CRUISER | 2006-2009 GSJ1_ 4WD |
| TOYOTA | FJ CRUISER | 2009-2018 GSJ1_ 4WD |
| TOYOTA | FORTUNER | 2015-on GUN156 4WD |
| TOYOTA | HILUX | 2005-2015 KUN26, GGN25 4WD |
| TOYOTA | HILUX | 2015-on GGN, GUN 4WD |
| TOYOTA | HILUX | 2023-on GUN GR Sport 4WD |
| TOYOTA | HILUX SURF | 2002-2009 _N210-215 |
| TOYOTA | LAND CRUISER | 2010-on 150 Series |
| TOYOTA | LAND CRUISER PRADO | 2002-2010 120 Series |
| TOYOTA | LAND CRUISER PRADO | 2009-on 150 Series |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF3230K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3230K
Specifications
Kit
| Kit type | Front Upper Control Arm - Inner Bush Kit (Offset) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 4 Tubes, 4 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3230K |
|---|---|
| EAN | 9317745032304 |
SuperPro SPF3230K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3230K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3230K
Vehicle fitment
16 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front1 vehicle-specific note
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 0.75deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Foton TunlandP201 4WD | 2012–2024 | Front |
| Lexus GXGX460 (J150) | 2009–2024 | Front |
| Lexus GXGX470 (J120) | 2001–2009 | Front |
| Toyota 4 RunnerGRN210/215 4x4 | 2002–2009 | Front |
| Toyota FJ CruiserGSJ15 | 2009–2018 | Front |
| Toyota FortunerAN50, AN60, Adds +1.0deg camber | 2005–2015 | Front |
| Toyota FortunerGUN156 4WD | 2015–on | Front |
| Toyota HiluxGGN125R, GUN126R, 136R (N80) 4WD | 2015–2025 | Front |
| Toyota HiluxGGN25R, KUN26R (N70) 4WD | 2005–2015 | Front |
| Toyota HiluxGUN126R GR SPORT (N80) 4WD | 2023–2025 | Front |
| Toyota HiluxGUN126R ROGUE WIDE-BODY (N80) 4WD | 2022–2025 | Front |
| Toyota HiluxGUN226R, 227R (N90) 4WD | 2025–on | Front |
| Toyota Hilux Surf_N210-215 | 2002–2009 | Front |
| Toyota Land Cruiser Prado120 Series | 2002–2010 | Front |
| Toyota Land Cruiser Prado150 Series | 2009–2024 | Front |
| Toyota TacomaN245, 250, 270 4WD | 2004–2015 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
