Measurements (mm)× 4in kit
- Outer diameterODAI36mmAII35mm
- Inner diameterID22 mm
- Length48 mm
- Flange thicknessFL12.5 mm
- Flange outer diameterFLOD48 mm
Centre tubeOD × ID × length, mm22.22 × 10.2 × 48× 4
SuperPro front upper control arm
Key specs
- PositionFront axle
- Install time3.5 hours
- Supplied as1 kit4 control arm bushings, tubes & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this upper control arm
The SuperPro SPF3507XK front upper control arm camber kit is designed to maintain optimal alignment and make handling consistent, a complete, premium upgrade. It enhances your vehicle's handling and performance. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
Application
| LEXUS | GS | 2005-2011 S190 |
| LEXUS | IS | 2005-2013 XE20 |
| LEXUS | IS C | 2009-2015 GSE2_ |
| TOYOTA | CROWN | 2003-2008 MS180 |
| TOYOTA | MARK X | 2004-2009 X120 |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF3507XK
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3507XK
Specifications
Kit
| Kit type | Front Upper Control Arm - Camber Kit |
|---|---|
| Kits required | 1 |
| Includes | 4 Control Arm Bushings, Tubes & Sleeves |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3507XK |
|---|---|
| EAN | 9317745761624 |
SuperPro SPF3507XK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3507XK is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3507XK
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Upper - Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +1.0deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Lexus GSS190Sold as: Control Arm Upper - Inner Bushing Kit | 2005–2011 | Front |
| Lexus IS CGSE2_ | 2009–2015 | Front |
| Lexus ISXE20 | 2005–2013 | Front |
| Toyota CrownMS180Performance Alignment - Adds +0.5deg camber | 2003–2008 | Front |
| Toyota Mark XX120Performance Alignment - Adds +0.5deg camber | 2004–2009 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
