Measurements (mm)× 2in kit
- Outer diameterOD70.5 mm
- Inner diameterID27 mm
- Length36 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 60× 2
SuperPro front control arm Lower-Rear bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit2 control arm bushings, tubes & 4 spacers
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this control arm Lower-Rear bush kit
The SuperPro SPF3809K front control arm lower-rear bush kit double offset is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. It is a superior alternative to rubber, providing higher quality, quieter, longer lasting bushings. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life.
70mm OD Alignment Correction. Caster Adjustment
SuperPro SPF3809K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3809K
Specifications
Kit
| Kit type | Front Control Arm Lower-Rear Bush Kit - Double Offset |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Tubes & 4 Spacers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3809K |
|---|---|
| EAN | 9317745038092 |
SuperPro SPF3809K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 4in kit
- Outer diameterODAI54mmAII40mm
- Inner diameterID27 mm
- Length12.5 mm
- Flange thicknessFL1 mm
- Flange outer diameterFLOD54 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 60× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3809K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3809K
Vehicle fitment
22 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front1 vehicle-specific noteSold as differs on 4 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Inner Rear Bushing Kit. 4 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg caster
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Hyundai ElantraAD (EXCL. SR) | 2015–2020 | Front |
| Hyundai ElantraAD SR | 2015–2020 | Front |
| Hyundai H-1TQ | 2008–2021 | Front |
| Hyundai i30PD | 2016–on | Front |
| Hyundai i30PD N-Performance | 2018–on | Front |
| Hyundai iLoadTQ | 2008–2022 | Front |
| Hyundai iMAXTQ | 2008–2022 | Front |
| Hyundai ix35LM | 2010–2015 | Front |
| Hyundai KonaOS | 2017–on | Front |
| Hyundai TucsonTL | 2015–2020 | Front |
| Hyundai VelosterJS | 2018–2022 | Front |
| KIA Carnival / Grand CarnivalYP | 2014–2020 | Front |
| KIA CeratoBD (EXCL GT) | 2018–on | Front |
| KIA CeratoBD GT | 2018–on | Front |
| KIA NiroDE | 2016–2022 | Front |
| KIA RondoRP | 2013–2018 | Front |
| KIA SorentoXMSold as: Control Arm Lower - Inner Front Bushing KitPerformance Alignment - 70mm OD - Adds +0.5deg caster | 2009–2015 | Front |
| KIA SportageSL | 2010–2015 | Front |
| LDV G10SV | 2015–on | Front |
| Tesla Model 35YJ3 AWDSold as: Radius Arm Lower - Bushing Kit | 2017–on | Front |
| Tesla Model 35YJ3 RWDSold as: Radius Arm Lower - Bushing Kit | 2017–on | Front |
| Tesla Model Y5YJYSold as: Radius Arm Lower - Bushing Kit | 2021–on | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$169.00
Fitment position: Front
Sale price$209.00
