Measurements (mm)× 4in kit
- Outer diameterODAI40mmAII39mm
- Inner diameterID23.8 mm
- Length59 mm
- Flange thicknessFL9 mm
- Flange outer diameterFLOD48 mm
Centre tubeOD × ID × length, mm24 × 10 × 60× 4
SuperPro front upper control arm
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this upper control arm
The SuperPro SPF3873XK front upper control arm camber kit is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. It enhances your vehicle's handling and performance. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
SuperPro SPF3873XK
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3873XK
Specifications
Kit
| Kit type | Front Upper Control Arm - Camber Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3873XK |
|---|---|
| EAN | 9317745765462 |
SuperPro SPF3873XK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3873XK is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3873XK
Vehicle fitment
2 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg camber
| Vehicle | Years | Position |
|---|---|---|
| VW Amarok2H 2WD | 2010–2022 | Front |
| VW Amarok2H 4motion | 2010–2022 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
VW AMAROK 2010-ON 2H 4MOTION
