Measurements (mm)× 4in kit
- Outer diameterOD46 mm
- Inner diameterID24.8 mm
- Length51 mm
- Flange thicknessFL4 mm
- Flange outer diameterFLOD52 mm
Centre tubeOD × ID × length, mm25 × 14.3 × 51× 4
SuperPro front upper control arm bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit4 bushings, 4 tubes, 4 washers
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this upper control arm bush kit
The SuperPro SPF3892K front upper control arm bush kit (offset) is designed to improve suspension geometry and cornering traction, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. It is made with SuperPro's proprietary engineering-grade polyurethane formula. SuperPro bushings offer greater quality and reliability through their unique materials.
Application
| FORD AUSTRALIA | EVEREST | 2015-2018 UA 4WD |
| FORD AUSTRALIA | EVEREST | 2018-2022 UAII 4WD |
| FORD AUSTRALIA | RANGER | 2011-06/2015 PX I 2WD |
| FORD AUSTRALIA | RANGER | 2011-06/2015 PX I 4WD |
| FORD AUSTRALIA | RANGER | 2015-07/2018 PX II 2WD |
| FORD AUSTRALIA | RANGER | 2015-07/2018 PX II 4WD |
| FORD AUSTRALIA | RANGER | 2018-2022 PX III 2WD |
| FORD AUSTRALIA | RANGER | 2018-2022 PX III 4WD |
| MAZDA | BT-50 | 2011-2015 UP |
| MAZDA | BT-50 | 2015-2020 UR |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF3892K
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3892K
Specifications
Kit
| Kit type | Front Upper Control Arm Bush Kit (Offset) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 4 Tubes, 4 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3892K |
|---|---|
| EAN | 9317745038924 |
SuperPro SPF3892K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3892K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3892K
Vehicle fitment
10 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 1.0deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford EverestUA 4WD | 2015–2018 | Front |
| Ford EverestUAII 4WD | 2018–2022 | Front |
| Ford RangerPX I 2WD | 2011–2015 | Front |
| Ford RangerPX I 4WD | 2011–2015 | Front |
| Ford RangerPX II 2WD | 2015–2018 | Front |
| Ford RangerPX II 4WD | 2015–2018 | Front |
| Ford RangerPX III 2WD | 2018–2022 | Front |
| Ford RangerPX III 4WD | 2018–2022 | Front |
| Mazda BT-50UP, UR 2WDPerformance Alignment - Adds +/-1.0deg camber | 2011–2020 | Front |
| Mazda BT-50UP, UR 4WDPerformance Alignment - Adds +/-1.0deg camber | 2011–2020 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $73.69
Fitment position: Front
Sale price$261.31
Regular price$335.00
Save $80.56
Fitment position: Front
Sale price$109.44
Regular price$190.00
Save $148.33
Fitment position: Front
Sale price$808.67
Regular price$957.00
Save $140.57
Fitment position: Rear
Sale price$498.43
Regular price$639.00