Measurements (mm)× 4in kit
- Outer diameterODAI48mmAII34mm
- Inner diameterID24 mm
- Length12.5 mm
Centre tubeOD × ID × length, mm24 × 12.3 × 53× 2
SuperPro front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit2 control arm bushings, tubes & 4 spacers
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF3965K front lower control arm rear bush kit double offset is designed to maintain optimal alignment and make handling consistent, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. SuperPro says its polyurethane bushings provide corrected or maintained steering geometry, better handling, increased safety and improved tyre wear.
Application
| NISSAN | CUBE | 2009-2019 Z12 |
| NISSAN | MICRA | 2002-2010 K12 |
| NISSAN | PULSAR | 2012-2017 B17 Sedan |
| NISSAN | PULSAR | 2013-2017 C12 Hatch incl. SSS |
| RENAULT | CLIO | 2005-2013 Series III |
| RENAULT | MEGANE | 2002-2008 Series II |
| RENAULT | MODUS / GRAND MODUS | 2004-2012 Series I |
| RENAULT | SCENIC | 2003-2009 Series II |
Use this kit to increase Caster for improved directional stability, turn-in in and control
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF3965K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3965K
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit - Double Offset |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Tubes & 4 Spacers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3965K |
|---|---|
| EAN | 9317745039655 |
SuperPro SPF3965K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 2in kit
- Outer diameterOD58.05 mm
- Inner diameterID24 mm
- Length28.5 mm
- Flange thicknessFL12.25 mm
Centre tubeOD × ID × length, mm24 × 12.3 × 53× 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3965K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3965K
Vehicle fitment
11 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg caster
| Vehicle | Years | Position |
|---|---|---|
| Nissan CubeZ12 | 2009–2019 | Front |
| Nissan MicraK12 | 2002–2010 | Front |
| Nissan PulsarB17 Sedan | 2012–2017 | Front |
| Nissan PulsarC12 Hatch incl. SSS | 2013–2017 | Front |
| Renault ClioBB, CB Series II | 1998–2016 | Front |
| Renault ClioBR, CR Series III (Excl Sport) | 2005–2014 | Front |
| Renault ClioBR, CR SPORT Series III | 2006–2014 | Front |
| Renault Grand ScenicJM | 2004–2009 | Front |
| Renault MeganeSeries II | 2002–2008 | Front |
| Renault Modus / Grand ModusSeries I | 2004–2012 | Front |
| Renault ScenicSeries II | 2003–2009 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
