- Outer diameterOD41 mm
- Inner diameterID23.8 mm
- Length27.5 mm
- Flange thicknessFL7.5 mm
- Flange outer diameterFLOD53 mm
SuperPro front lower control arm bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
- A wheel alignment is needed after fitting.
About this lower control arm bush kit
The SuperPro SPF3980K front lower control arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| HOLDEN | ADVENTRA | 2003-2004 VY |
| HOLDEN | ADVENTRA | 2004-2009 VZ |
| HOLDEN | CREWMAN | 2003-2004 VY AWD |
| HOLDEN | CREWMAN | 2004-2007 VZ AWD |
| HSV | AVALANCHE | 2003-2006 VY, VZ Ute |
| HSV | AVALANCHE | 2003-2006 VY, VZ Wagon |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF3980K
Specifications
Kit
| Kit type | Front Lower Control Arm Bush Kit (Rear) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3980K |
|---|---|
| EAN | 9317745039808 |
SuperPro SPF3980K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3980K
Vehicle fitment
9 vehicles| Vehicle | Years | Position |
|---|---|---|
| Holden AdventraVY | 2003–2004 | Front |
| Holden AdventraVZ | 2004–2009 | Front |
| Holden CrewmanVY AWD | 2003–2004 | Front |
| Holden CrewmanVZ AWD | 2004–2007 | Front |
| HSV AvalancheY SERIES UTE | 2004–2004 | Front |
| HSV AvalancheY SERIES WAGON | 2003–2004 | Front |
| HSV AvalancheZ SERIES UTE | 2004–2006 | Front |
| HSV AvalancheZ SERIES WAGON | 2004–2006 | Front |
| HSV Coupe 4V2, Z SERIES | 2004–2006 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.







