Measurements (mm)× 2in kit
- Outer diameterOD48 mm
- Inner diameterID27 mm
- Length64 mm
- Flange thicknessFLDI10mmDII7mm
- Flange outer diameterFLODEI58mmEII52mm
Centre tubeOD × ID × length, mm27-22.05 × 19.5 × 71× 2
SuperPro front lower control arm, front bush kit
Key specs
- PositionFront axle
- Install time3.5 hours
- Supplied as1 kit
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF4691K front lower control arm front bush kit (offset) is engineered with strength and durability in mind, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. It enhances your vehicle's handling and performance.
SuperPro SPF4691K
Alignment
- Alignment affectedCamber / Caster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF4691K
Specifications
Kit
| Kit type | Front Lower Control Arm - Front Bush Kit (Offset) |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Sleeves, Tubes & 4 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF4691K |
|---|---|
| EAN | 9317745046912 |
SuperPro SPF4691K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF4691K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF4691K
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds+/-1.0deg camber and +1.0deg caster
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Lexus GXGX470 (J120) | 2001–2009 | Front |
| Toyota 4 RunnerGRN210/215 4x4Performance Alignment - Adds +0.5deg camber and +0.5deg caster | 2002–2009 | Front |
| Toyota Hilux Surf_N210-215Performance Alignment - Adds +0.5deg camber and +0.5deg caster | 2002–2009 | Front |
| Toyota Land Cruiser Prado120 Series | 2002–2010 | Front |
| Toyota TacomaN245, 250, 270 4WD | 2004–2015 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
TOYOTA PRADO 2003-2009 120 SERIES
