Measurements (mm)× 4in kit
- Outer diameterOD43 mm
- Inner diameterID25 mm
- Length72.5 mm
- Flange thicknessFLDI8mmDII5.5mm
- Flange outer diameterFLODEI51mmEII49mm
Centre tubeOD × ID × length, mm25 × 14.3 × 73.5× 4
SuperPro front control arm Lower-Inner bush kit, extra double offset
Key specs
- PositionFront axle
- Install time4 hours
- Supplied as1 kit4 shell bushings, 4 tubes, 8 washers
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF4786XK front control arm lower-inner bush kit extra double offset is engineered with strength and durability in mind, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. SuperPro bushings offer greater quality and reliability through their unique materials.
SuperPro SPF4786XK
Alignment
- Alignment affectedCamber
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF4786XK
Specifications
Kit
| Kit type | Front Control Arm Lower-Inner Bush Kit - Extra Double Offset |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Shell Bushings, 4 Tubes, 8 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF4786XK |
|---|---|
| EAN | 9317745767473 |
SuperPro SPF4786XK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF4786XK is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF4786XK
Vehicle fitment
9 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Extra offset
- Adds +/- 1.0deg camber
| Vehicle | Years | Position |
|---|---|---|
| Mercedes-Benz X-Class470 2WD | 2017–2020 | Front |
| Mercedes-Benz X-Class470 4WD | 2017–2020 | Front |
| Nissan NavaraD23, NP300 2WD Coil Spring | 2015–on | Front |
| Nissan NavaraD23, NP300 2WD Leaf Spring | 2015–on | Front |
| Nissan NavaraD23, NP300 4WD Coil Spring Rear | 2015–on | Front |
| Nissan NavaraD23, NP300 4WD Leaf Spring Rear | 2015–on | Front |
| Nissan NavaraD40 2WD | 2005–2015 | Front |
| Nissan NavaraD40 4WD | 2005–2015 | Front |
| Nissan PathfinderR51 | 2005–2013 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
NISSAN NAVARA 2015-ON D23, NP300 4WD (COIL REAR)
Fitment position: Front & Rear
Sale price$2,790.00