Measurements (mm)× 2in kit
- Outer diameterODAI24mmAII21.5mm
- Inner diameterID16 mm
- Length21.9 mm
- Flange thicknessFL4.5 mm
- Flange outer diameterFLOD34.5 mm
Whiteline front idler arm bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this idler arm bush kit
The Whiteline W11010 front idler arm bush kit is designed to greatly increase control and confidence, the perfect, complete upgrade. Whiteline's synthetic elastomer bushings induce positive steering precision and feedback. Whiteline's advanced synthetic elastomer bushings have core characteristics that ensure superior elasticity, memory and outright durability.
Whiteline W11010
Specifications
Kit
| Kit type | Front Idler Arm Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W11010 |
|---|---|
| EAN | 9319924348923 |
Whiteline W11010
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W11010 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W11010
Vehicle fitment
48 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front21 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Mazda 121CDSuits models to - 10/1977 and power steering models | 1976–1981 | Front |
| Mazda 323FA | 1977–1982 | Front |
| Mazda 626CB | 1979–1982 | Front |
| Mazda 808FA321mm L - With flange | 1972–1978 | Front |
| Mazda 929LA4 SedanSuits models with chassis No. LA4MS737269 - on | 1979–1986 | Front |
| Mazda 929LA4 WagonSuits models with chassis No. LA4MS737269 - on | 1979–1986 | Front |
| Mazda RX-2Mk1Bushing with flange | 1970–1976 | Front |
| Mazda RX-310ABushing with flange | 1971–1973 | Front |
| Mazda RX-312ABushing with flange | 1972–1976 | Front |
| Mazda RX-413B Mk2Bushing with flange | 1973–1979 | Front |
| Mazda RX-5MK 2Suits power steering models to - 10/1977 with flange | 1975–1981 | Front |
| Mazda RX-7Series 1, 2, 3 SA21mm L - With flange | 1979–1985 | Front |
| Mitsubishi DelicaSA - SE 2WD | 1980–1986 | Front |
| Mitsubishi ExpressSA - SE 2WD | 1980–1986 | Front |
| Mitsubishi GalantA120 | 1976–1980 | Front |
| Mitsubishi GalantA160 | 1980–1984 | Front |
| Mitsubishi GalantE10Tapered bushing design | 1984–1990 | Front |
| Mitsubishi GalantHG, HH FWD | 1987–1992 | Front |
| Mitsubishi L200 ExpressMA, MB, MC, MD 2WD | 1980–1986 | Front |
| Mitsubishi L200MA - MD 2WD | 1980–1986 | Front |
| Mitsubishi L200ME - MJ 2WD | 1986–1996 | Front |
| Mitsubishi L200ME - MJ 4WD | 1986–1996 | Front |
| Mitsubishi L300 ExpressSA, SB, SC, SD 2WD | 1981–1986 | Front |
| Mitsubishi L300SA, SB, SC, SD 2WD | 1981–1986 | Front |
| Mitsubishi L300 StarwagonSA, SB, SC, SD 2WD | 1981–1986 | Front |
| Mitsubishi LancerA70Tapered bushing design | 1978–1979 | Front |
| Mitsubishi LancerLA, LB, LCTapered bushing design | 1974–1981 | Front |
| Mitsubishi SigmaGE | 1977–1980 | Front |
| Mitsubishi SigmaGH | 1980–1982 | Front |
| Mitsubishi SigmaGJ, GK, GN SedanTapered bushing design | 1982–1987 | Front |
| Mitsubishi SigmaGJ, GK, GN WagonTapered bushing design | 1982–1987 | Front |
| Mitsubishi Sigma ScorpionGE | 1977–1980 | Front |
| Mitsubishi Sigma ScorpionGH | 1980–1982 | Front |
| Mitsubishi Sigma ScorpionGJ, GK, GL CoupeTapered bushing design | 1982–1985 | Front |
| Mitsubishi TritonME - MJ 2WD | 1986–1996 | Front |
| Nissan 1200B110 Sedan | 1970–1974 | Front |
| Nissan 1200B120 Ute | 1971–1985 | Front |
| Nissan 120YB210 | 1974–1979 | Front |
| Nissan 180B61024mm OD - Tapered bushing design | 1972–1977 | Front |
| Nissan 720720Tapered bushing design - Suits models to - 05/1982 | 1980–1986 | Front |
| Nissan Datsun 200BN810 Sedan and Coupe | 1977–1981 | Front |
| Nissan Datsun 200BN810 Wagon | 1977–1981 | Front |
| Nissan Datsun 240KC210 | 1972–1978 | Front |
| Nissan Datsun SkylineC210 | 1978–1981 | Front |
| Nissan DATSUN1600P51024mm OD - Tapered bushing design | 1968–1972 | Front |
| Nissan Pick UP720Tapered bushing design - Suits models to - 05/1982 | 1980–1986 | Front |
| Nissan Stanza710, A10Tapered bushing design | 1978–1982 | Front |
| Nissan SunnyB310, VB310 | 1979–1983 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
